Hi Tino,
Thanks for probing deep
I have installed libvirt 0.9.7 .
my ubuntu is 11.04, OpenNebula 2.2 and the following are the commands i
have given while installing libvirt and all of them executed with out
any errors.
tar -zxvf libvirt-0.9.7.tar.gz
cd libvirt-0.9.7
./configure --with-esxi
make
sudo make install
cd /usr/local/lib
sudo ldconfig
On 11/24/2011 10:35 PM, Siva Prasad wrote:
yes i have installed libvirt with ./configure --wtih-esxi
--Suser
On 11/24/2011 10:30 PM, Tino Vazquez wrote:
Hi,
Do you have libvirt installed with VMware support? Which version of
libvirt is it?
Regards,
-Tino
--
Constantino Vázquez Blanco, MSc
Project Engineer
OpenNebula - The Open Source Toolkit for Data Center Virtualization
www.OpenNebula.org
<http://www.opennebula.org/> | @tinova79 | @OpenNebula
On Thu, Nov 24, 2011 at 5:33 PM, Siva Prasad <[email protected]
<mailto:[email protected]>> wrote:
HI Tino,
I was followoing 2.2 documentation itself.
So I had installed openNebula 2.2
and vmware addon 2.2 itself.
*Now I get the following:*
---------------------------------
virsh # connect "-c gsx:// 10.3.3.48/?no_verify=1
<http://10.3.3.48/?no_verify=1>"
error: Failed to connect to the hypervisor
error: invalid argument: could not parse connection URI -c
gsx://10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>
virsh # connect -c gsx://10.3.3.48/?no_verify=1
<http://10.3.3.48/?no_verify=1>
error: unexpected data 'gsx://10.3.3.48/?no_verify=1
<http://10.3.3.48/?no_verify=1>'
virsh#
------------------------------------------------------------
Actually my onevm commands all work fine.( I know this has
nothing to do till i try to setup a host or launch a vm)
do we need to have the accessible nfs storage to the hypervisor
inorder *"virsh # connect "-c gsx:// 10.3.3.48/?no_verify=1
<http://10.3.3.48/?no_verify=1>" *to work?
I have not yet shared a folder over Nfs.
Any help is appreciated.
Thanks,
Suser
On 11/24/2011 4:10 PM, Tino Vazquez wrote:
Hi Siva,
comments inline,
On Thu, Nov 24, 2011 at 10:07 AM, Siva Prasad
<[email protected] <mailto:[email protected]>> wrote:
Hi Guys,
I am setting up openNebula on ubuntu11.04. and I am trying
to configure the VMwaresServer hypervisor but no luck.The
below are the steps i have done.
1) Installed ubuntu and openbnebula 2.0.1
you are using a rather old version, i suggest you upgrade to the
last stable (v3.0), or v2.2 if you want to use a stable version
of the vmware drivers as well.
2) installed the libvirt.
3) installed vmwareaddon 2.2
vmware addon drivers 2.2 are compatible with opennebula 2.2
4) configured password and esx to gsx in the
/etc/one/vmwarerc file.(the same password is there on my
vmware server hypervisor which I installed on windows XP).
5) changed the datastore in /etc/one/vmm_sh/vmm_sh_vmware.conf
I could not connect to the hypervisor using hte virsh
command line. I get the following error.
*virsh #* connect 10.3.3.48
error: Failed to connect to the hypervisor
error: no connection driver available for No connection for
URI 10.3.3.48
you need to connect with a "-c esx://<host>/?no_verify=1" URI
*virsh #*
I could ping 10.3.3.48
NOTE:Should I install certificate in the keystore. This is
ubuntu 2.0.1 does it need key in the keystore? I thought
theres no need to do this.
No, you don't need to do this. Just out of curiosity, which
documentation are you following?
Regards,
-T
Can anybody help me.
--Suser
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
_______________________________________________
Users mailing list
[email protected]
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
