Thanks Tino For all your help.
The following worked , I installed vmware on port 443 (which is not
default 8333).So virsh was trying to talk on the default https port 8333
dats y it was failing so when I changed my uri to talk on to 443 it worked.
Thanks to my Manager :-)
--Siva
On 11/24/2011 10:54 PM, Siva Prasad wrote:
Hi Tino,
Thanks a lot it worked it moved further. (now i know How stupid
mistake i was donig)
virsh # connect gsx://10.3.3.48/?no_verify=1
Enter username for 10.3.3.48 [root]: oneadmin
Enter oneadmin's password for 10.3.3.48:
I have configured the URI to be gsx in the vmwarerc file.(As my
hypervisor is Vmware server)
I have provided oneadmin password as oneadmin which i configured in
vmwarerc file. And this oneadmin user is in the hypervisor macine and
i could login with this oneadmin user into the vmware server also.But
when I provide this password to the virsh It stays there only without
any response (though the password is correct)
Any thoughts ?
-- Suser.
On 11/24/2011 10:44 PM, Tino Vazquez wrote:
Hi,
You don't need both connect and "-c". Try
# connect esx://host/?no_verify=1
Which version of libvirt are you using?
Regards,
-T
--
Constantino Vázquez Blanco, MSc
Project Engineer
OpenNebula - The Open Source Toolkit for Data Center Virtualization
www.OpenNebula.org
<http://www.opennebula.org/> | @tinova79 | @OpenNebula
On Thu, Nov 24, 2011 at 6:05 PM, Siva Prasad <[email protected]
<mailto:[email protected]>> wrote:
yes i have installed libvirt with ./configure --wtih-esxi
--Suser
On 11/24/2011 10:30 PM, Tino Vazquez wrote:
Hi,
Do you have libvirt installed with VMware support? Which version
of libvirt is it?
Regards,
-Tino
--
Constantino Vázquez Blanco, MSc
Project Engineer
OpenNebula - The Open Source Toolkit for Data Center Virtualization
www.OpenNebula.org
<http://www.opennebula.org/> | @tinova79 | @OpenNebula
On Thu, Nov 24, 2011 at 5:33 PM, Siva Prasad
<[email protected] <mailto:[email protected]>> wrote:
HI Tino,
I was followoing 2.2 documentation itself.
So I had installed openNebula 2.2
and vmware addon 2.2 itself.
*Now I get the following:*
---------------------------------
virsh # connect "-c gsx:// 10.3.3.48/?no_verify=1
<http://10.3.3.48/?no_verify=1>"
error: Failed to connect to the hypervisor
error: invalid argument: could not parse connection URI -c
gsx://10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>
virsh # connect -c gsx://10.3.3.48/?no_verify=1
<http://10.3.3.48/?no_verify=1>
error: unexpected data 'gsx://10.3.3.48/?no_verify=1
<http://10.3.3.48/?no_verify=1>'
virsh#
------------------------------------------------------------
Actually my onevm commands all work fine.( I know this has
nothing to do till i try to setup a host or launch a vm)
do we need to have the accessible nfs storage to the
hypervisor inorder *"virsh # connect "-c gsx://
10.3.3.48/?no_verify=1 <http://10.3.3.48/?no_verify=1>" *to
work?
I have not yet shared a folder over Nfs.
Any help is appreciated.
Thanks,
Suser
On 11/24/2011 4:10 PM, Tino Vazquez wrote:
Hi Siva,
comments inline,
On Thu, Nov 24, 2011 at 10:07 AM, Siva Prasad
<[email protected] <mailto:[email protected]>> wrote:
Hi Guys,
I am setting up openNebula on ubuntu11.04. and I am
trying to configure the VMwaresServer hypervisor but
no luck.The below are the steps i have done.
1) Installed ubuntu and openbnebula 2.0.1
you are using a rather old version, i suggest you upgrade
to the last stable (v3.0), or v2.2 if you want to use a
stable version of the vmware drivers as well.
2) installed the libvirt.
3) installed vmwareaddon 2.2
vmware addon drivers 2.2 are compatible with opennebula 2.2
4) configured password and esx to gsx in the
/etc/one/vmwarerc file.(the same password is there on
my vmware server hypervisor which I installed on
windows XP).
5) changed the datastore in
/etc/one/vmm_sh/vmm_sh_vmware.conf
I could not connect to the hypervisor using hte virsh
command line. I get the following error.
*virsh #* connect 10.3.3.48
error: Failed to connect to the hypervisor
error: no connection driver available for No connection
for URI 10.3.3.48
you need to connect with a "-c esx://<host>/?no_verify=1" URI
*virsh #*
I could ping 10.3.3.48
NOTE:Should I install certificate in the keystore. This
is ubuntu 2.0.1 does it need key in the keystore? I
thought theres no need to do this.
No, you don't need to do this. Just out of curiosity, which
documentation are you following?
Regards,
-T
Can anybody help me.
--Suser
_______________________________________________
Users mailing list
[email protected]
<mailto:[email protected]>
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
_______________________________________________
Users mailing list
[email protected]
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
