I've just tested the ubuntu image and gets the IP selected by OpenNebula. It also configures the root authorized_keys wth SSH_PUBLIC_KEY parameter in context. Can you send us the template used to create the VM?
On Mon, Jan 21, 2013 at 6:16 PM, Marco Jagodzinska <jagodzin...@fh-aachen.de> wrote: > In Addition: The whole system is just on one computer so there is no need > for contacting other computers. And also no need for bridging? > > > Am 21.01.2013 12:23, schrieb Marco Jagodzinska: > >> Thank you! >> >> I will try it, but why is ttylinux working when virbr0 isn't associated >> with any physical interface? >> >> >> Am 21.01.2013 12:10, schrieb Javier Fontan: >>> >>> virbr0 is a bridge automatically created by libvirt and is not >>> associated to any physical interface (vnet0 is not a physical >>> interface). You should create a new bridge or associate a physical >>> interface to virbr0. I think it is better to create a new one. If you >>> are using ubuntu you can find more information in these two guides: >>> >>> >>> https://help.ubuntu.com/10.04/serverguide/network-configuration.html#bridging >>> >>> http://cloudblab.files.wordpress.com/2012/05/opennebula-3-4-1-in-ubuntu-12-04-precises-single-machine-installation-for-learning-and-testing-purpose1.pdf >>> >>> On Mon, Jan 21, 2013 at 10:01 AM, Marco Jagodzinska >>> <jagodzin...@fh-aachen.de> wrote: >>>> >>>> Thanks for your answer! >>>> >>>> oneadmin@Arbeitsrechner:~/one-templates$ brctl show >>>> bridge name bridge id STP enabled interfaces >>>> virbr0 8000.fe00c0a87a05 yes vnet0 >>>> >>>> Cheers, >>>> Marco >>>> >>>> >>>> Am 18.01.2013 14:43, schrieb Javier Fontan: >>>> >>>>> Can you check that virbr0 bridge is associated to a physical >>>>> interface? You can use "brctl show" to get that info. >>>>> >>>>> On Thu, Jan 17, 2013 at 2:42 PM, Marco Jagodzinska >>>>> <jagodzin...@fh-aachen.de> wrote: >>>>>> >>>>>> Hello, >>>>>> >>>>>> I'm trying to get the ubuntu image from the marketplace running, but >>>>>> the >>>>>> VM >>>>>> doesn't seem to get an IP. >>>>>> (I don't get another IP in this net even if I scan with nmap.) >>>>>> >>>>>> This is my virtual net: >>>>>> >>>>>> oneadmin@Arbeitsrechner:~/one-templates$ ifconfig virbr0 >>>>>> virbr0 Link encap:Ethernet Hardware Adresse 00:00:00:00:00:00 >>>>>> inet Adresse:192.168.122.1 Bcast:192.168.122.255 >>>>>> Maske:255.255.255.0 >>>>>> UP BROADCAST MULTICAST MTU:1500 Metrik:1 >>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>>>> TX packets:2726 errors:0 dropped:0 overruns:0 carrier:0 >>>>>> Kollisionen:0 Sendewarteschlangenlänge:0 >>>>>> RX-Bytes:0 (0.0 B) TX-Bytes:191341 (191.3 KB) >>>>>> >>>>>> This is the template for "onevnet create small_network.net": >>>>>> >>>>>> oneadmin@Arbeitsrechner:~/one-templates$ cat network/small_network.net >>>>>> NAME = "public" >>>>>> TYPE = FIXED >>>>>> >>>>>> BRIDGE = virbr0 >>>>>> LEASES = [ IP="192.168.122.5"] >>>>>> LEASES = [ IP="192.168.122.6"] >>>>>> LEASES = [ IP="192.168.122.7"] >>>>>> >>>>>> NETWORK_ADDRESS=192.168.122.0 >>>>>> NETWORK_MASK=255.255.255.0 >>>>>> GATEWAY=192.168.122.1 >>>>>> DNS=192.168.122.1 >>>>>> >>>>>> >>>>>> And finally this is the template for "onevm create ubuntu.one" >>>>>> >>>>>> oneadmin@Arbeitsrechner:~/one-templates$ cat ubuntu.one >>>>>> NAME = ubuntu >>>>>> >>>>>> CPU = 0.7 >>>>>> MEMORY = 1024 >>>>>> >>>>>> DISK = [ IMAGE = "ubuntu" ] >>>>>> NIC = [ NETWORK = "public" ] >>>>>> >>>>>> FEATURES = [ acpi="no" ] >>>>>> >>>>>> CONTEXT=[ >>>>>> ETH0_IP = "$NIC[IP, NETWORK=\"public\"]", >>>>>> ETH0_NETWORK = "$NETWORK[NETWORK_ADDRESS, NETWORK=\"public\"]", >>>>>> ETH0_MASK = "$NETWORK[NETWORK_MASK, NETWORK=\"public\"]", >>>>>> ETH0_GATEWAY = "$NETWORK[GATEWAY, NETWORK=\"public\"]", >>>>>> ETH0_DNS = "$NETWORK[DNS, NETWORK=\"public\"]", >>>>>> SSH_PUBLIC_KEY = "ssh-rsa >>>>>> >>>>>> >>>>>> AAAAB3NzaC1yc2EAAAADAQABAAABAQCo0VdfEFgPO6fzNYiKvH19jmF/6ARD0O41VyKal8fE0WpBL54SzwbnP5TjjIojDPF4BHKeAQ7P9DehUZHWsrOzpEe862AsDBjeJXK3MPO8pSztS11fUb84sxFoPlrvzX6VkiVD7D1CDVV8Jq4cudOe+DGAreQXV408mF9RAMT7G4jkawd99YF4a5NmvnCxqSp+Fi6GBW/g36w0p6JKYzSKnqzGQZ8phrE6FL63lfO/OnlDgD/xntJ+bVx4MUI/MJS0OKoDvMsjfirYtOLNeuaH6SFDHlK/EJE2jocLrzB+BhalFgfsCm3oCuIyzi+AHRy9F3dNME+4K96PyJsCPZ/T >>>>>> oneadmin@Arbeitsrechner" >>>>>> ] >>>>>> >>>>>> (infos are from here >>>>>> >>>>>> >>>>>> http://opennebula.org/documentation:rel3.8:context_overview#preparing_the_template >>>>>> ) >>>>>> >>>>>> (The image is registered: >>>>>> oneadmin@Arbeitsrechner:/var/log/one$ oneimage list >>>>>> ID USER GROUP NAME DATASTORE SIZE TYPE PER >>>>>> STAT >>>>>> RVMS >>>>>> 3 oneadmin oneadmin ubuntu default 11G OS No >>>>>> used >>>>>> 1 >>>>>> ) >>>>>> >>>>>> Onebody knows what I'm doing wrong? >>>>>> >>>>>> Cheers, >>>>>> Marco >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users@lists.opennebula.org >>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >>>>>> >>>>> >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opennebula.org >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > > -- Javier Fontán Muiños Project Engineer OpenNebula - The Open Source Toolkit for Data Center Virtualization www.OpenNebula.org | jfon...@opennebula.org | @OpenNebula _______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org