Your VM configuration seems to be ok. Can you check that your machine has a route to access 192.168.122.0/24 associated to virbr0?
Alternatively try to access the machine using VNC. Maybe there is a problem with the machine and is unable to start. On Tue, Jan 29, 2013 at 4:24 PM, Marco Jagodzinska <[email protected]> wrote: > (Sorry, I didn't answer to the group just to Javier...) > > > Hey, thanks for your answer! > > I try to give all neeeded information (and hopefully not more ;)) > > oneadmin@Arbeitsrechner:~/one-templates$ ifconfig virbr0 > > virbr0 Link encap:Ethernet Hardware Adresse fe:00:c0:a8:7a:06 > inet Adresse:192.168.122.1 Bcast:192.168.122.255 > Maske:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 > RX packets:92 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 > Kollisionen:0 Sendewarteschlangenlänge:0 > RX-Bytes:10519 (10.5 KB) TX-Bytes:115616 (115.6 KB) > > > > > oneadmin@Arbeitsrechner:~/one-templates$ cat network/small_network.net > NAME = "public" > TYPE = FIXED > > BRIDGE = virbr0 > LEASES = [ IP="192.168.122.5"] > LEASES = [ IP="192.168.122.6"] > LEASES = [ IP="192.168.122.7"] > > NETWORK_ADDRESS=192.168.122.0 > NETWORK_MASK=255.255.255.0 > GATEWAY=192.168.122.1 > DNS="8.8.8.8 8.8.4.4" #(also tried: 192.168.122.1) > > > > oneadmin@Arbeitsrechner:~/one-templates$ cat ubuntu.one > NAME = ubuntu > > CPU = 0.7 > MEMORY = 1024 > > DISK = [ IMAGE = "Ubuntu" ] > NIC = [ NETWORK = "public" ] > > FEATURES = [ acpi="no" ] > > CONTEXT=[ > ETH0_IP = "$NIC[IP, NETWORK=\"public\"]", > ETH0_NETWORK = "$NETWORK[NETWORK_ADDRESS, NETWORK=\"public\"]", > ETH0_MASK = "$NETWORK[NETWORK_MASK, NETWORK=\"public\"]", > ETH0_GATEWAY = "$NETWORK[GATEWAY, NETWORK=\"public\"]", > ETH0_DNS = "$NETWORK[DNS, NETWORK=\"public\"]", > SSH_PUBLIC_KEY = "ssh-rsa > AAAAB3NzaC1yc2EAAAADAQABAAABAQCo0VdfEFgPO6fzNYiKvH19jmF/6ARD0O41VyKal8fE0WpBL54SzwbnP5TjjIojDPF4BHKeAQ7P9DehUZHWsrOzpEe862AsDBjeJXK3MPO8pSztS11fUb84sxFoPlrvzX6VkiVD7D1CDVV8Jq4cudOe+DGAreQXV408mF9RAMT7G4jkawd99YF4a5NmvnCxqSp+Fi6GBW/g36w0p6JKYzSKnqzGQZ8phrE6FL63lfO/OnlDgD/xntJ+bVx4MUI/MJS0OKoDvMsjfirYtOLNeuaH6SFDHlK/EJE2jocLrzB+BhalFgfsCm3oCuIyzi+AHRy9F3dNME+4K96PyJsCPZ/T > oneadmin@Arbeitsrechner" > ] > > > oneadmin@Arbeitsrechner:~/one-templates$ onevm list > ID USER GROUP NAME STAT UCPU UMEM HOST > TIME > 41 oneadmin oneadmin ttylinux runn 5 64M localhost 0d > 05h21 > 42 oneadmin oneadmin ubuntu runn 0 1024M localhost 0d > 02h07 > > > oneadmin@Arbeitsrechner:~/one-templates$ onevm show 42 | grep IP > ETH0_IP="192.168.122.7", > IP="192.168.122.7", > > oneadmin@Arbeitsrechner:~/one-templates$ ssh [email protected] > ssh: connect to host 192.168.122.7 port 22: No route to host > > > Cheers, > Marco > > Am 29.01.2013 15:25, schrieb Javier Fontan: > > I've just tested the ubuntu image and gets the IP selected by > OpenNebula. It also configures the root authorized_keys wth > SSH_PUBLIC_KEY parameter in context. Can you send us the template used > to create the VM? > > On Mon, Jan 21, 2013 at 6:16 PM, Marco Jagodzinska > <[email protected]> wrote: > > In Addition: The whole system is just on one computer so there is no need > for contacting other computers. And also no need for bridging? > > > Am 21.01.2013 12:23, schrieb Marco Jagodzinska: > > Thank you! > > I will try it, but why is ttylinux working when virbr0 isn't associated > with any physical interface? > > > Am 21.01.2013 12:10, schrieb Javier Fontan: > > virbr0 is a bridge automatically created by libvirt and is not > associated to any physical interface (vnet0 is not a physical > interface). You should create a new bridge or associate a physical > interface to virbr0. I think it is better to create a new one. If you > are using ubuntu you can find more information in these two guides: > > > https://help.ubuntu.com/10.04/serverguide/network-configuration.html#bridging > > http://cloudblab.files.wordpress.com/2012/05/opennebula-3-4-1-in-ubuntu-12-04-precises-single-machine-installation-for-learning-and-testing-purpose1.pdf > > On Mon, Jan 21, 2013 at 10:01 AM, Marco Jagodzinska > <[email protected]> wrote: > > Thanks for your answer! > > oneadmin@Arbeitsrechner:~/one-templates$ brctl show > bridge name bridge id STP enabled interfaces > virbr0 8000.fe00c0a87a05 yes vnet0 > > Cheers, > Marco > > > Am 18.01.2013 14:43, schrieb Javier Fontan: > > Can you check that virbr0 bridge is associated to a physical > interface? You can use "brctl show" to get that info. > > On Thu, Jan 17, 2013 at 2:42 PM, Marco Jagodzinska > <[email protected]> wrote: > > Hello, > > I'm trying to get the ubuntu image from the marketplace running, but > the > VM > doesn't seem to get an IP. > (I don't get another IP in this net even if I scan with nmap.) > > This is my virtual net: > > oneadmin@Arbeitsrechner:~/one-templates$ ifconfig virbr0 > virbr0 Link encap:Ethernet Hardware Adresse 00:00:00:00:00:00 > inet Adresse:192.168.122.1 Bcast:192.168.122.255 > Maske:255.255.255.0 > UP BROADCAST MULTICAST MTU:1500 Metrik:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:2726 errors:0 dropped:0 overruns:0 carrier:0 > Kollisionen:0 Sendewarteschlangenlänge:0 > RX-Bytes:0 (0.0 B) TX-Bytes:191341 (191.3 KB) > > This is the template for "onevnet create small_network.net": > > oneadmin@Arbeitsrechner:~/one-templates$ cat network/small_network.net > NAME = "public" > TYPE = FIXED > > BRIDGE = virbr0 > LEASES = [ IP="192.168.122.5"] > LEASES = [ IP="192.168.122.6"] > LEASES = [ IP="192.168.122.7"] > > NETWORK_ADDRESS=192.168.122.0 > NETWORK_MASK=255.255.255.0 > GATEWAY=192.168.122.1 > DNS=192.168.122.1 > > > And finally this is the template for "onevm create ubuntu.one" > > oneadmin@Arbeitsrechner:~/one-templates$ cat ubuntu.one > NAME = ubuntu > > CPU = 0.7 > MEMORY = 1024 > > DISK = [ IMAGE = "ubuntu" ] > NIC = [ NETWORK = "public" ] > > FEATURES = [ acpi="no" ] > > CONTEXT=[ > ETH0_IP = "$NIC[IP, NETWORK=\"public\"]", > ETH0_NETWORK = "$NETWORK[NETWORK_ADDRESS, NETWORK=\"public\"]", > ETH0_MASK = "$NETWORK[NETWORK_MASK, NETWORK=\"public\"]", > ETH0_GATEWAY = "$NETWORK[GATEWAY, NETWORK=\"public\"]", > ETH0_DNS = "$NETWORK[DNS, NETWORK=\"public\"]", > SSH_PUBLIC_KEY = "ssh-rsa > > > AAAAB3NzaC1yc2EAAAADAQABAAABAQCo0VdfEFgPO6fzNYiKvH19jmF/6ARD0O41VyKal8fE0WpBL54SzwbnP5TjjIojDPF4BHKeAQ7P9DehUZHWsrOzpEe862AsDBjeJXK3MPO8pSztS11fUb84sxFoPlrvzX6VkiVD7D1CDVV8Jq4cudOe+DGAreQXV408mF9RAMT7G4jkawd99YF4a5NmvnCxqSp+Fi6GBW/g36w0p6JKYzSKnqzGQZ8phrE6FL63lfO/OnlDgD/xntJ+bVx4MUI/MJS0OKoDvMsjfirYtOLNeuaH6SFDHlK/EJE2jocLrzB+BhalFgfsCm3oCuIyzi+AHRy9F3dNME+4K96PyJsCPZ/T > oneadmin@Arbeitsrechner" > ] > > (infos are from here > > > http://opennebula.org/documentation:rel3.8:context_overview#preparing_the_template > ) > > (The image is registered: > oneadmin@Arbeitsrechner:/var/log/one$ oneimage list > ID USER GROUP NAME DATASTORE SIZE TYPE PER > STAT > RVMS > 3 oneadmin oneadmin ubuntu default 11G OS No > used > 1 > ) > > Onebody knows what I'm doing wrong? > > Cheers, > Marco > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > > > > -- Javier Fontán Muiños Project Engineer OpenNebula - The Open Source Toolkit for Data Center Virtualization www.OpenNebula.org | [email protected] | @OpenNebula _______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
