Dear Umar, I see. So that device is an "iSCSI box" and not a PC with standard Linux. In that case, your OpenNebula head can not ssh into the device so you can only use the shared LVM solution, i guess.
Best Regards, Sandor 2013/7/9 Umar Draz <[email protected]> > Hi > > Well I don't know about the HP SAN model, Our SAN Admin just give the ip > address of the SAN, and I already have configured this on my KVM. Here is > the steps How I already using that SAN. > > iscsiadm -m discovery -t st -p 192.168.0.101 > iscsiadm -m node --targetname "iqn.2012-03.com.example:KVM-server" > --portal "192.168.0.101:3260" --login > > and then I have mounted /dev/sdb1 as my /vms folder on my existing KVM > server. Now the I want this SAN with opennebula and with 2 KVM host, We > will shutdown existing KVM where this SAN already attached. So our setup > will look like this > > Controlller = 192.168.0.98 > kvm1 = 192.168.0.99 > kvm2 = 192.168.0.100 > SAN = 192.168.0.101 > > Br. > > Umar > > > On Mon, Jul 8, 2013 at 8:35 PM, Sándor Ács <[email protected]>wrote: > >> Dear Umar, >> >> What kind of HP SAN do you have exactly? >> >> Best Regards, >> Sandor >> >> 2013/7/8 Umar Draz <[email protected]> >> >>> Hi Everyone, >>> >>> I have 3 nodes cluster of openenbula, >>> >>> 1 controller node (openenbule) >>> 2 KVM hosts >>> >>> Now I have HP SAN where I have configure ISCSi tartget for my virtual >>> machine. >>> >>> Would you please help how I can use that ISCSi storage? What I need to >>> do install on openebula controller ? and what i need to install on KVM >>> hosts. >>> >>> Br. >>> >>> Umar >>> >>> _______________________________________________ >>> Users mailing list >>> [email protected] >>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >>> >>> >
_______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
