Hi Umar, I agree with Sándor that you should be using the LVM drivers. Did you manage to get it working?
Regards, Jaime On Tue, Jul 9, 2013 at 10:11 AM, Sándor Ács <[email protected]>wrote: > Dear Umar, > > To be honest, I've never tried it (because I prefer the original iSCSI > solution) however you can find details in the following site: > http://wiki.opennebula.org/shared_lvm. > > Best Regards, > Sandor > > > 2013/7/9 Umar Draz <[email protected]> > >> Hi, >> >> Yes, how I can do this shared LVM solution, what I need on all 3 server >> machine? >> >> Br. >> >> Umar >> >> >> On Tue, Jul 9, 2013 at 1:04 PM, Sándor Ács <[email protected]>wrote: >> >>> Dear Umar, >>> >>> I see. So that device is an "iSCSI box" and not a PC with standard >>> Linux. In that case, your OpenNebula head can not ssh into the device so >>> you can only use the shared LVM solution, i guess. >>> >>> Best Regards, >>> Sandor >>> >>> >>> 2013/7/9 Umar Draz <[email protected]> >>> >>>> Hi >>>> >>>> Well I don't know about the HP SAN model, Our SAN Admin just give the >>>> ip address of the SAN, and I already have configured this on my KVM. Here >>>> is the steps How I already using that SAN. >>>> >>>> iscsiadm -m discovery -t st -p 192.168.0.101 >>>> iscsiadm -m node --targetname "iqn.2012-03.com.example:KVM-server" >>>> --portal "192.168.0.101:3260" --login >>>> >>>> and then I have mounted /dev/sdb1 as my /vms folder on my existing KVM >>>> server. Now the I want this SAN with opennebula and with 2 KVM host, We >>>> will shutdown existing KVM where this SAN already attached. So our setup >>>> will look like this >>>> >>>> Controlller = 192.168.0.98 >>>> kvm1 = 192.168.0.99 >>>> kvm2 = 192.168.0.100 >>>> SAN = 192.168.0.101 >>>> >>>> Br. >>>> >>>> Umar >>>> >>>> >>>> On Mon, Jul 8, 2013 at 8:35 PM, Sándor Ács <[email protected]>wrote: >>>> >>>>> Dear Umar, >>>>> >>>>> What kind of HP SAN do you have exactly? >>>>> >>>>> Best Regards, >>>>> Sandor >>>>> >>>>> 2013/7/8 Umar Draz <[email protected]> >>>>> >>>>>> Hi Everyone, >>>>>> >>>>>> I have 3 nodes cluster of openenbula, >>>>>> >>>>>> 1 controller node (openenbule) >>>>>> 2 KVM hosts >>>>>> >>>>>> Now I have HP SAN where I have configure ISCSi tartget for my virtual >>>>>> machine. >>>>>> >>>>>> Would you please help how I can use that ISCSi storage? What I need >>>>>> to do install on openebula controller ? and what i need to install on KVM >>>>>> hosts. >>>>>> >>>>>> Br. >>>>>> >>>>>> Umar >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> [email protected] >>>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >>>>>> >>>>>> >>>> >>> >> > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opennebula.org/listinfo.cgi/users-opennebula.org > > -- Join us at OpenNebulaConf2013 <http://opennebulaconf.com/> in Berlin, 24-26 September, 2013 -- Jaime Melis Project Engineer OpenNebula - The Open Source Toolkit for Cloud Computing www.OpenNebula.org | [email protected]
_______________________________________________ Users mailing list [email protected] http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
