After Bogdan helped me to correct my errors I was able to manually register extension 1000 on my OpenSER 1000 by entering: /sbin/openstlrc add 1000 password [email protected]
Then when I went to register my soft-phone to the OpenSER as extension 1000. On my soft-phone (X-Lite 3.0 running on WinXP) I got the message "503 - Message Too Big". I corrected this by editing the file on the OpenSER /etc/openser/openser.cfg (at line 96 Column 24) increasing the default value from 2048 to 8192. Then I got the message "483 - Too Many Hops" on my soft phone. So back on the OpenSER I edited /etc/openser/openser.cfg (at Line 91 Column 40) and increased the default value from 10 to 100. I still got the "488 - Too Many Hops" message on the client. So I ran a SIP capture on the OpenSER by using the command: ngrep -p -q -W byline port 5060 >test.txt Here is the output of that capture: ---------------------------------------------------------------------------------------------------- interface: eth0 (10.100.100.0/255.255.255.0) filter: (ip or ip6) and ( port 5060 ) U 208.76.137.2:31215 -> 10.100.100.199:5060 REGISTER sip:usmetrotel.com SIP/2.0. Via: SIP/2.0/UDP 208.76.137.2:31215;branch=z9hG4bK-d8754z-1271d5783f053154-1---d8754z-;rport. Max-Forwards: 70. Contact: <sip:[email protected]:31215;rinstance=705236a41a2fcc6d>. To: "Larry-Kemp"<sip:[email protected]>. From: "Larry-Kemp"<sip:[email protected]>;tag=863d2266. Call-ID: OTljYmExZTU2ZjI0ODU2NDlhYzYwYmFmMmE3OTkxYjU.. CSeq: 1 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. User-Agent: X-Lite release 1103k stamp 53621. Content-Length: 0. . U 10.100.100.199:5060 -> 208.76.137.2:31215 SIP/2.0 483 Too Many Hops. Via: SIP/2.0/UDP 208.76.137.2:31215;branch=z9hG4bK-d8754z-1271d5783f053154-1---d8754z-;rport=31215. To: "Larry-Kemp"<sip:[email protected]>;tag=329cfeaa6ded039da25ff8cbb8668bd2.cb9e. From: "Larry-Kemp"<sip:[email protected]>;tag=863d2266. Call-ID: OTljYmExZTU2ZjI0ODU2NDlhYzYwYmFmMmE3OTkxYjU.. CSeq: 1 REGISTER. Server: OpenSER (1.2.2-notls (i386/linux)). Content-Length: 0. . : ---------------------------------------------------------------------------------------------------- I am not sure what else it could be with the Soft-phone client or OpenSER. Here is a brief outlook of what my IP network & traffic routing looks like: Network/Device Private IP Public IP (if it has one) --------------------------------------------------------------------------------------------- -Network 1 (Private LAN): My WinXP PC containing X-Lite Soft Phone 172.20.30.22 None Default gateway: 172.20.30.254 208.76.137.2 -Internet -Network 2 (DMZ): My OpenSER Server: 10.100.100.199 = 208.76.137.116 --------------------------------------------------------------------------------------------- Questions: - Do you think the OpenSER is having trouble making its way back to the soft-client or to the Internet based on what the SIP capture shows? - Could the OpenSER have a problem leaving one private network, traversing the Internet, and then going back into another private network? - Do I perhaps need to somehow add a route on the OpenSER server to tell it how to get to that remote network? Larry Kemp Network Engineer U.S. Metropolitan Telecom Bonita Springs, FL USA -----Original Message----- From: Kemp, Larry Sent: Wednesday, October 14, 2009 10:15 AM To: 'Bogdan-Andrei Iancu'; OpenSIPS users mailling list Subject: RE: [OpenSIPS-Users] An Old OpenSER Error For A New OpenSIPS User ------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------ Bogdan, Thank you very much for your help with OpenSER. I have seen many people report this issue in forums but was never really able to see where folks found a resolve for this. I see too in Flavio's book on page 100 where he states what the user openser's password must be entered as when adding VoIP extensions. In the book it states to change HAS_SERWEB="yes". I guess later on it will cover the PHP & SerMyAdmin possibilities. Now that I know that this is controlled in this location if I need the SERWEB enabled again, I can as needed and then restart OpenSER. Now I can move on to getting the VoIP X-Lite soft-phones to register to OpenSER and make hopefully make interdomain test calls. Here is my output now: ------------------------------------------------------------------------------------- MY-SERVERS-NAME:/etc/openser# /sbin/openserctl add 1000 password [email protected] database engine 'MYSQL' loaded Control engine 'FIFO' loaded is_user: user counter=0 check_db_alias: alias counter=0 MySql password for user 'open...@localhost': new user '1000' added MY-SERVERS-NAME:/etc/openser# /sbin/openserctl add 1001 password 1001@ mydomain.com database engine 'MYSQL' loaded Control engine 'FIFO' loaded is_user: user counter=0 check_db_alias: alias counter=0 MySql password for user 'open...@localhost': new user '1001' added ------------------------------------------------------------------------------------- Multumiri! Larry Kemp Network Engineer U.S. Metropolitan Telecom, LLC Bonita Springs, FL USA ------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------- -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bogdan-Andrei Iancu Sent: Tuesday, October 13, 2009 5:06 PM To: OpenSIPS users mailling list Subject: Re: [OpenSIPS-Users] An Old OpenSER Error For A New OpenSIPS User Hi Larry, in openserctlrc check for the SERWEB compatibility field and disable it. When this is enabled, openserctl tries to populate the phplib_id field in the subscriber table (which by default does not exists). Regards, Bogdan Kemp, Larry wrote: > > I am certain for anyone experienced this is an easy fix, so help me > out OpenSIPS community. > > I am using OpenSER Source 1.2.2 on Linux version 2.6.26-2-686 (Debian > 2.6.26-19) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)). > > I am using Flavio's book. On page 100 (Adding Authentication with > MySQL) at step 4 it states: > > Configure two user accounts using the openserctl utility. > > /sbin/openserctl add 1000 password [email protected] (mydomain.com) > > /sbin/openserctl add 1001 password [email protected] (mydomain.com) > > In either instance the system returns: > > Database 'MYSQL' loaded > > Control engine 'FIFO' loaded > > is_user: user counter=0 > > check_db_alias: alias counter=0 > > *ERROR 1045 (28000): Access denied for user 'openser'@'localhost' > (using password: YES)* > > or > > *ERROR 1054 (42S22) at line 1: Unknown column 'phplib_id' in 'field > list'* > > *ERROR: introducing the new user'1000' to the database failed* > > I have verified that the users openser, openserro and root have the > correct passwords to access the MySQL database named openser (as one > forum stated it was a password issue). I have tried several changes to > the file /etc/openser/openserctlrc as several online forums indicated > this was the issue. I have found this listed in many online forums but > I have not been able to fix this trying several of the things that are > mentioned. > > Can anyone on this [email protected] please advise me? I am > using OpensSER 1.2.2 as that is what the book I have procured > indicates to use and I want to strictly follow what Flavio's book > states to use. Thanks in advance. > > Respectfully, > > Larry Kemp > Network Engineer > U.S. Metropolitan Telecom, LLC > Bonita Springs, FL USA > > ---------------------------------------------------------------------- > -- > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
