Hi Larry,

most probably your opensips does not recognize the usmetrotel.com as a 
local domain, so it is keep forwarding the request to itself.

adding something like:
    alias="usmetrotel.com"

in your script should solve the problem.

Regards,
Bogdan

Kemp, Larry wrote:
> After Bogdan helped me to correct my errors I was able to manually register 
> extension 1000 on my OpenSER 1000 by entering: /sbin/openstlrc add 1000 
> password [email protected]
>
> Then when I went to register my soft-phone to the OpenSER as extension 1000. 
> On my soft-phone (X-Lite 3.0 running on WinXP) I got the message "503 - 
> Message Too Big". I corrected this by editing the file on the OpenSER 
> /etc/openser/openser.cfg (at line 96 Column 24) increasing the default value 
> from 2048 to 8192.
>
> Then I got the message "483 - Too Many Hops" on my soft phone. So back on the 
> OpenSER I edited /etc/openser/openser.cfg (at Line 91 Column 40) and 
> increased the default value from 10 to 100. I still got the "488 - Too Many 
> Hops" message on the client.
>
> So I ran a SIP capture on the OpenSER by using the command: ngrep -p -q -W 
> byline port 5060 >test.txt 
>
> Here is the output of that capture:
> ----------------------------------------------------------------------------------------------------
> interface: eth0 (10.100.100.0/255.255.255.0)
> filter: (ip or ip6) and ( port 5060 )
>
> U 208.76.137.2:31215 -> 10.100.100.199:5060 REGISTER sip:usmetrotel.com 
> SIP/2.0.
> Via: SIP/2.0/UDP 
> 208.76.137.2:31215;branch=z9hG4bK-d8754z-1271d5783f053154-1---d8754z-;rport.
> Max-Forwards: 70.
> Contact: <sip:[email protected]:31215;rinstance=705236a41a2fcc6d>.
> To: "Larry-Kemp"<sip:[email protected]>.
> From: "Larry-Kemp"<sip:[email protected]>;tag=863d2266.
> Call-ID: OTljYmExZTU2ZjI0ODU2NDlhYzYwYmFmMmE3OTkxYjU..
> CSeq: 1 REGISTER.
> Expires: 3600.
> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, 
> INFO.
> User-Agent: X-Lite release 1103k stamp 53621.
> Content-Length: 0.
> .
>
> U 10.100.100.199:5060 -> 208.76.137.2:31215 SIP/2.0 483 Too Many Hops.
> Via: SIP/2.0/UDP 
> 208.76.137.2:31215;branch=z9hG4bK-d8754z-1271d5783f053154-1---d8754z-;rport=31215.
> To: 
> "Larry-Kemp"<sip:[email protected]>;tag=329cfeaa6ded039da25ff8cbb8668bd2.cb9e.
> From: "Larry-Kemp"<sip:[email protected]>;tag=863d2266.
> Call-ID: OTljYmExZTU2ZjI0ODU2NDlhYzYwYmFmMmE3OTkxYjU..
> CSeq: 1 REGISTER.
> Server: OpenSER (1.2.2-notls (i386/linux)).
> Content-Length: 0.
> .
> :
> ----------------------------------------------------------------------------------------------------
>
> I am not sure what else it could be with the Soft-phone client or OpenSER. 
> Here is a brief outlook of what my IP network & traffic routing looks like:
>
> Network/Device                                                Private IP      
>         Public IP (if it has one)       
> ---------------------------------------------------------------------------------------------
> -Network 1 (Private LAN):
>    My WinXP PC containing X-Lite Soft Phone   172.20.30.22            None
>    Default gateway:                                   172.20.30.254   
> 208.76.137.2
>
>      -Internet
>
> -Network 2 (DMZ):
>    My OpenSER Server:                                 10.100.100.199  =       
> 208.76.137.116 
> ---------------------------------------------------------------------------------------------
>
> Questions:
>
> - Do you think the OpenSER is having trouble making its way back to the 
> soft-client or to the Internet based on what the SIP capture shows? 
> - Could the OpenSER have a problem leaving one private network, traversing 
> the Internet, and then going back into another private network?
> - Do I perhaps need to somehow add a route on the OpenSER server to tell it 
> how to get to that remote network?
>
> Larry Kemp
> Network Engineer
> U.S. Metropolitan Telecom
> Bonita Springs, FL USA
>
>
> -----Original Message-----
> From: Kemp, Larry
> Sent: Wednesday, October 14, 2009 10:15 AM
> To: 'Bogdan-Andrei Iancu'; OpenSIPS users mailling list
> Subject: RE: [OpenSIPS-Users] An Old OpenSER Error For A New OpenSIPS User
>
> ------------------------------------------------------------------------------------
> ------------------------------------------------------------------------------------
>
> Bogdan,
>
> Thank you very much for your help with OpenSER. I have seen many people 
> report this issue in forums but was never really able to see where folks 
> found a resolve for this. I see too in Flavio's book on page 100 where he 
> states what the user openser's password must be entered as when adding VoIP 
> extensions. In the book it states to change HAS_SERWEB="yes". I guess later 
> on it will cover the PHP & SerMyAdmin possibilities. Now that I know that 
> this is controlled in this location if I need the SERWEB enabled again, I can 
> as needed and then restart OpenSER. Now I can move on to getting the VoIP 
> X-Lite soft-phones to register to OpenSER and make hopefully make interdomain 
> test calls. 
>
> Here is my output now:
> -------------------------------------------------------------------------------------
>
> MY-SERVERS-NAME:/etc/openser# /sbin/openserctl add 1000 password 
> [email protected] database engine 'MYSQL' loaded Control engine 'FIFO' loaded
> is_user: user counter=0
> check_db_alias: alias counter=0
> MySql password for user 'open...@localhost': 
> new user '1000' added
>
> MY-SERVERS-NAME:/etc/openser# /sbin/openserctl add 1001 password 1001@ 
> mydomain.com database engine 'MYSQL' loaded Control engine 'FIFO' loaded
> is_user: user counter=0
> check_db_alias: alias counter=0
> MySql password for user 'open...@localhost': 
> new user '1001' added
> -------------------------------------------------------------------------------------
>
> Multumiri!
>
> Larry Kemp
> Network Engineer
> U.S. Metropolitan Telecom, LLC
> Bonita Springs, FL USA
> -------------------------------------------------------------------------------------
> -------------------------------------------------------------------------------------
>
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Bogdan-Andrei Iancu
> Sent: Tuesday, October 13, 2009 5:06 PM
> To: OpenSIPS users mailling list
> Subject: Re: [OpenSIPS-Users] An Old OpenSER Error For A New OpenSIPS User
>
> Hi Larry,
>
> in openserctlrc check for the SERWEB compatibility field and disable it. 
> When this is enabled, openserctl tries to populate the phplib_id field in the 
> subscriber table (which by default does not exists).
>
> Regards,
> Bogdan
>
> Kemp, Larry wrote:
>   
>> I am certain for anyone experienced this is an easy fix, so help me 
>> out OpenSIPS community.
>>
>> I am using OpenSER Source 1.2.2 on Linux version 2.6.26-2-686 (Debian
>> 2.6.26-19) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)).
>>
>> I am using Flavio's book. On page 100 (Adding Authentication with
>> MySQL) at step 4 it states:
>>
>> Configure two user accounts using the openserctl utility.
>>
>> /sbin/openserctl add 1000 password [email protected] (mydomain.com)
>>
>> /sbin/openserctl add 1001 password [email protected] (mydomain.com)
>>
>> In either instance the system returns:
>>
>> Database 'MYSQL' loaded
>>
>> Control engine 'FIFO' loaded
>>
>> is_user: user counter=0
>>
>> check_db_alias: alias counter=0
>>
>> *ERROR 1045 (28000): Access denied for user 'openser'@'localhost' 
>> (using password: YES)*
>>
>> or
>>
>> *ERROR 1054 (42S22) at line 1: Unknown column 'phplib_id' in 'field 
>> list'*
>>
>> *ERROR: introducing the new user'1000' to the database failed*
>>
>> I have verified that the users openser, openserro and root have the 
>> correct passwords to access the MySQL database named openser (as one 
>> forum stated it was a password issue). I have tried several changes to 
>> the file /etc/openser/openserctlrc as several online forums indicated 
>> this was the issue. I have found this listed in many online forums but 
>> I have not been able to fix this trying several of the things that are 
>> mentioned.
>>
>> Can anyone on this [email protected] please advise me? I am 
>> using OpensSER 1.2.2 as that is what the book I have procured 
>> indicates to use and I want to strictly follow what Flavio's book 
>> states to use. Thanks in advance.
>>
>> Respectfully,
>>
>> Larry Kemp
>> Network Engineer
>> U.S. Metropolitan Telecom, LLC
>> Bonita Springs, FL USA
>>
>> ----------------------------------------------------------------------
>> --
>>
>> _______________________________________________
>> Users mailing list
>> [email protected]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>   
>>     
>
>
> _______________________________________________
> Users mailing list
> [email protected]
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> [email protected]
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>   


_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Reply via email to