If you install from sources you must have enough experience and willingness to cope with all the differences that may appear compared with a stock distribution. Tomorrow you may bump into a different set of problems depending on environment, OS version and system libraries.
MediaProxy software itself is well documented in this respect and the fact that you have failed to perform an installation on your particular system does not mean that the software is poorly documented, but the contrary. Adrian On May 27, 2011, at 9:23 AM, Barsan Liviu wrote: > Hi Dan, > > You have partially right because I didn't formulated well my observations, so > reformulated: would be welcome a detailed guide for installation from sources. > Simply I took the MediaProxy sources (2.4.4.tar.gz) and do what is written in > the INSTALL file. > > For most of the modules was enough what is in the INSTALL, but for MediaProxy > not, everybody who will install from sources will encounter the same troubles > as I did: > - iptables loading > - nothing about how to start the media dispatcher and media relay, even now > I'm not sure if I doing well by starting them from command line with: > # sudo modprobe ip_tables > # media-dispatcher & > # media-relay > (Seems to work) > > - and in the INSTALL file nothing about media-relay init scripts > - not enough information about how to check if the installation/configuration > was correct.E.g. how to check kernel version, how to see log for Python based > applications, for example because of incompatible gnutls I wasn't able to see > what is the real problem, what logged the Media-Relay was not enough(log > level == DEBUG). > > To see some guide which is near to what I expect(even if has few errors): > http://voiprookie.blogspot.com/2009/04/blog-post.html. Contains few words > about each module, how to check if is installed, has examples for > configuration etc. > Compare with what you wrote: apt-get install mediaproxy-relay ;( > > Additionally, would be welcome few examples(opensips.cfg and config.ini) for > STUN and TURN solution for OpensSIPs-MediaProxy. > > Thank you, > Liviu > > From: Dan Pascu <[email protected]> > To: OpenSIPS users mailling list <[email protected]> > Sent: Thu, May 26, 2011 3:12:19 PM > Subject: Re: [OpenSIPS-Users] media-dispatcher and media relay connection > problem > > > On 26 May 2011, at 11:14, Barsan Liviu wrote: > > > Hi, > > > > With the python-gnutls update to 1.2.1 the mediaproxy works fine. > > A suggestion: would be welcome a minimal install guide for Ubuntu/Debian, > > apt-get install mediaproxy-relay ;) > > If this is too terse to qualify as 'minimal', then the INSTALL file in the > project explains in a step-by-step fashion, what you need to do to install it > on debian. It also explains how to install it from source. I take you did > read that file, but it didn't qualify as a minimal guide for you? > > > for example I spent several days until I find out that iptables should be > > loaded before starting media-relay. > > Manually loading it is not necessary. The media-relay startup script takes > care of loading it for you. The only case where this doesn't apply is if you > do not use the debian packages and/or try to manually start the relay without > using the provided init script, but for that case the INSTALL file tells you > to use the debian startup scripts as examples and they load the iptables > module before starting the relay. > > I'm not quite sure what do you mean when you say you want a debian/ubuntu > installation guide, yet you do not seem to be using the debian/ubuntu > packages because you run into issues that are automatically solved for you > when you install the debian packages (automatic dependency handling, init > script already properly setting up the environment, ...) > > -- > Dan > > > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > _______________________________________________ > Users mailing list > [email protected] > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
