Hello Nick,
Thank you for the feedback! Now I have to start updating the
documentation... :(
Best regards,
Liviu Chircu
OpenSIPS Developer
http://www.opensips-solutions.com
On 03/04/2014 07:08 AM, Nick Altmann wrote:
Hello, Liviu.
It seems it works well. Thank you.
Let's add it to source tree. :-)
--
Nick
2014-02-20 20:47 GMT+04:00 Liviu Chircu <[email protected]
<mailto:[email protected]>>:
Hello Nick,
Could you test out the attached patch for the advertised
interfaces? Example of module configuration:
modparam("stun", "primary_ip", "192.168.2.133 / 46.78.50.64")
modparam("stun", "primary_port", "5060 / 5061")
modparam("stun", "alternate_ip", "192.168.2.134 / 50.64.46.78")
modparam("stun", "alternate_port", "6001 / 6003")
Best regards,
Liviu Chircu
OpenSIPS Developer
http://www.opensips-solutions.com
On 02/19/2014 07:35 PM, Nick Altmann wrote:
Thank you. This code needed to run STUN on always NATed servers
like Amazon cloud.
--
Nick
2014-02-19 21:32 GMT+04:00 Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>>:
Hi,
I identify the code that need to be changed - it should be a
lot of work to add an "advertised" value for the configured
IPs and ports. It should make it in the new release.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 19.02.2014 17:45, Nick Altmann wrote:
Yes, it is!
--
Nick
2014-02-19 17:19 GMT+04:00 Bogdan-Andrei Iancu
<[email protected] <mailto:[email protected]>>:
Hi,
Nick, you want something like an "advertised" but for
the STUN stuff ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 19.02.2014 14:25, Nick Altmann wrote:
I'm about STUN only. Its required two external IPs.
I'm not about routing.
--
Nick
2014-02-19 16:14 GMT+04:00 Ali Pey <[email protected]
<mailto:[email protected]>>:
Hi Nick,
I don't think such a thing is possible in opensips.
There can only be one advertised_address as far as
I know. I think you need to do your own message
manipulation in your route script based on the
route it's going to.
I'm interested in this scenario as well and look
forward to more replies from more knowledgeable
people.
Please post updates when you find a solution.
Regards,
Ali Pey
On Wed, Feb 19, 2014 at 5:47 AM, Nick Altmann
<[email protected]
<mailto:[email protected]>> wrote:
Hi!
How to correctly configure STUN module if we
have two interfaces with internal addresses
where NATed two external IPs? (ports are the same)
I mean something like advertised_address option.
--
Nick
_______________________________________________
Users mailing list
[email protected]
<mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
<mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
