Re: [OpenSIPS-Users] mi_json parameters format

Gary Nyquist Tue, 23 Sep 2014 11:47:09 -0700

Hi Răzvan,

I tried enclosing with quotes; but it made no difference

OPTIONS packet did not go out of the box.

The log still shows the same:

DBG:mi_json:mi_json_run_mi_cmd: command=t_uac_dlg accepts parameters
DBG:mi_json:mi_json_run_mi_cmd: got string param [OPTIONS]
DBG:mi_json:mi_json_run_mi_cmd: got string param [sip:[email protected]]
DBG:mi_json:mi_json_run_mi_cmd: got string param [.]
DBG:mi_json:mi_json_run_mi_cmd: got string param [.]
DBG:mi_json:mi_json_run_mi_cmd: got string param [From: sip:[email protected]]
DBG:mi_json:mi_json_run_mi_cmd: got string param [To: sip:[email protected]]
DBG:mi_json:mi_json_run_mi_cmd: got string param [Content-Type: text/plain]
DBG:mi_json:mi_json_run_mi_cmd: got mi_rpl=[0x7fe1bdee44d0]
DBG:mi_json:mi_json_answer_to_connection: building on page [0x7fe1bdd633b0:0]
DBG:mi_json:mi_json_build_page: start
DBG:mi_json:mi_json_build_content: start
DBG:mi_json:mi_json_build_content: done
DBG:httpd:answer_to_connection: MHD_create_response_from_data [0x7fe1bdd633b0:0]

Any more tips?

Thanks a lot.

- Gary

Sent: Tuesday, September 23, 2014 at 7:41 AM
From: "Răzvan Crainea" <[email protected]>
To: [email protected]
Subject: Re: [OpenSIPS-Users] mi_json parameters format

Hi, Gary!

Have you tried quoting the entire curl parameter using quotes?

curl "127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:[email protected],.,.,From: sip:[email protected],To: sip:[email protected],Content-Type: text/plain" Best regards,

Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.com

On 09/22/2014 07:23 PM, Gary Nyquist wrote:




Hi Răzvan,

 

Thanks for the response.

The "get_statistics" command works fine with the comma-separated params.

 

Facing problem with 't_uac_dlg' command.

Can't figure out how to pass the headers in the params.

 

As per the 'tm' module doc:



t_uac_dlg


Generates and sends a local SIP request.

Parameters:



	
	method - request method
	
	
	RURI - request SIP URI
	
	
	NEXT HOP - next hop SIP URI (OBP); use “.” if no value.
	
	
	socket - local socket to be used for sending the request; use “.” if no value.
	
	
	headers - set of additional headers to be added to the request; at least “From” and “To” headers must be specify)
	
	
	body - (optional, may not be present) request body (if present, requires the “Content-Type” and “Content-length” headers)
	




I want to send (say) an OPTIONS packet.


The following fifo commands works fine:

opensipsctl fifo t_uac_dlg OPTIONS "sip:[email protected]" . . "\"From: sip:[email protected]\r\nTo: sip:[email protected]\r\nContent-Type: text/plain\r\n"\"

 


But, 'mi_json' command won't work.

Have tried (without luck) with several permutations, including the follwoing:

curl 127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:[email protected],.,.,From: sip:[email protected],To: sip:[email protected],Content-Type: text/plain

 

Have tried with url encoing the complete params query string; but no OPTIONS packet goes out.

No errors in the log also (debug level 4). 

 

Any clues?

 

Regards

-Gary

 

Sent: Monday, September 22, 2014 at 8:11 AM

From: "Răzvan Crainea" <[email protected]>

To: [email protected]

Subject: Re: [OpenSIPS-Users] mi_json parameters format

Hi, Gary!



As the documentation indicates, you should pass the parameters separated

by comma. You can try something like this:



curl "http://127.0.0.1:8888/JSON/get_statistics?params=tm:,dialog:"



Best regards,



Răzvan Crainea

OpenSIPS Solutions

www.opensips-solutions.com



On 09/18/2014 11:41 PM, Gary Nyquist wrote:

> Hi,

>

> I am trying to use the MI interface to generate SIP MESSAGE packets locally

> and send out to remote SIP UA.

>

> The 'opensipsctl fifo' method works fine.

> The 'mi_datagram' method works fine.

>

> But not able to make "mi_json" work with "t_uac_dlg".

> Basically, can't figure out how the parameters for "t_uac_dlg" be formatted for the mi_json query.

>

> Reading the manual, I understand that the "parameters are to be comma-separated then URI-encoded."

> The following working fine:

> curl 10.0.0.30:8888/json/get_statistics?params=all

>

> But can't figure out how to pass the parameters for "t_uac_dlg" command.

>

> Any help / advice?

>

> Thanks

> -Gary

>

> _______________________________________________

> Users mailing list

> [email protected]

> http://lists.opensips.org/cgi-bin/mailman/listinfo/users





_______________________________________________

Users mailing list

[email protected]

http://lists.opensips.org/cgi-bin/mailman/listinfo/users



 

 
 

_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] mi_json parameters format

`t_uac_dlg`

Reply via email to