Hi, Gary!
Actually I just realized that you are not passing the headers parameter
correctly. You separate the headers with comma, whereas they all should
be a single parameter.
Can you try the following command?
curl
"127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:[email protected],.,.,From:
sip:[email protected]\r\nTo:
sip:[email protected]\r\nContent-Type: text/plain\r\n"
Best regards,
Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.com
On 09/23/2014 09:45 PM, Gary Nyquist wrote:
Hi Răzvan,
I tried enclosing with quotes; but it made no difference
OPTIONS packet did not go out of the box.
The log still shows the same:
DBG:mi_json:mi_json_run_mi_cmd: command=t_uac_dlg accepts parameters
DBG:mi_json:mi_json_run_mi_cmd: got string param [OPTIONS]
DBG:mi_json:mi_json_run_mi_cmd: got string param
[sip:[email protected]]
DBG:mi_json:mi_json_run_mi_cmd: got string param [.]
DBG:mi_json:mi_json_run_mi_cmd: got string param [.]
DBG:mi_json:mi_json_run_mi_cmd: got string param [From:
sip:[email protected]]
DBG:mi_json:mi_json_run_mi_cmd: got string param [To:
sip:[email protected]]
DBG:mi_json:mi_json_run_mi_cmd: got string param [Content-Type:
text/plain]
DBG:mi_json:mi_json_run_mi_cmd: got mi_rpl=[0x7fe1bdee44d0]
DBG:mi_json:mi_json_answer_to_connection: building on page
[0x7fe1bdd633b0:0]
DBG:mi_json:mi_json_build_page: start
DBG:mi_json:mi_json_build_content: start
DBG:mi_json:mi_json_build_content: done
DBG:httpd:answer_to_connection: MHD_create_response_from_data
[0x7fe1bdd633b0:0]
Any more tips?
Thanks a lot.
BR
- Gary
*Sent:* Tuesday, September 23, 2014 at 7:41 AM
*From:* "Răzvan Crainea" <[email protected]>
*To:* [email protected]
*Subject:* Re: [OpenSIPS-Users] mi_json parameters format
Hi, Gary!
Have you tried quoting the entire curl parameter using quotes?
curl
"127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:[email protected],.,.,From:
sip:[email protected],To: sip:[email protected],Content-Type:
text/plain"
Best regards,
Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.com
On 09/22/2014 07:23 PM, Gary Nyquist wrote:
Hi Răzvan,
Thanks for the response.
The "get_statistics" command works fine with the comma-separated
params.
Facing problem with 't_uac_dlg' command.
Can't figure out how to pass the headers in the params.
As per the 'tm' module doc:
|t_uac_dlg|
Generates and sends a local SIP request.
Parameters:
*
/method/ - request method
*
/RURI/ - request SIP URI
*
/NEXT HOP/ - next hop SIP URI (OBP); use “.” if no value.
*
/socket/ - local socket to be used for sending the request;
use “.” if no value.
*
/headers/ - set of additional headers to be added to the
request; at least “From” and “To” headers must be specify)
*
/body/ - (optional, may not be present) request body (if
present, requires the “Content-Type” and “Content-length” headers)
I want to send (say) an OPTIONS packet.
The following fifo commands works fine:
opensipsctl fifo t_uac_dlg OPTIONS "sip:[email protected]" . .
"\"From: sip:[email protected]\r\nTo:
sip:[email protected]\r\nContent-Type: text/plain\r\n"\"
But, 'mi_json' command won't work.
Have tried (without luck) with several permutations, including the
follwoing:
curl
127.0.0.1:8888/json/t_uac_dlg?params=OPTIONS,sip:[email protected],.,.,From:
sip:[email protected],To:
sip:[email protected],Content-Type: text/plain
Have tried with url encoing the complete params query string; but
no OPTIONS packet goes out.
No errors in the log also (debug level 4).
Any clues?
Regards
-Gary
*Sent:* Monday, September 22, 2014 at 8:11 AM
*From:* "Răzvan Crainea" <[email protected]>
*To:* [email protected]
*Subject:* Re: [OpenSIPS-Users] mi_json parameters format
Hi, Gary!
As the documentation indicates, you should pass the parameters
separated
by comma. You can try something like this:
curl "http://127.0.0.1:8888/JSON/get_statistics?params=tm:,dialog:";
Best regards,
Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.com <http://www.opensips-solutions.com>
On 09/18/2014 11:41 PM, Gary Nyquist wrote:
> Hi,
>
> I am trying to use the MI interface to generate SIP MESSAGE
packets locally
> and send out to remote SIP UA.
>
> The 'opensipsctl fifo' method works fine.
> The 'mi_datagram' method works fine.
>
> But not able to make "mi_json" work with "t_uac_dlg".
> Basically, can't figure out how the parameters for "t_uac_dlg"
be formatted for the mi_json query.
>
> Reading the manual, I understand that the "parameters are to be
comma-separated then URI-encoded."
> The following working fine:
> curl 10.0.0.30:8888/json/get_statistics?params=all
>
> But can't figure out how to pass the parameters for "t_uac_dlg"
command.
>
> Any help / advice?
>
> Thanks
> -Gary
>
> _______________________________________________
> Users mailing list
> [email protected]
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
