Hello Ben,
Do you mean for this
modparam("cfgutils", "varset", "init=i:1")
modparam("cfgutils", "varset", "gw=s:sip:11.11.11.11;transport=tcp")
or this
modparam("cfgutils", "shvset", "debug=i:1")
modparam("cfgutils", "shvset", "pstngw=s:sip:10.10.10.10")
in my case will be something like
modparam("cfgutils", "shvset", "vip1=s:192.168.10.100")
modparam("cfgutils", "shvset", "vip2=s:192.168.10.101")
modparam("cfgutils", "shvset", "vip3=s:192.168.10.102")
If vip relocated to antother node meaning on live node 1 will be two
vip's ( example node 3 fail then it relocate ip address to node 1)
How I can determine which vip ip address should be in use.
volg629
On Thu, Aug 2, 2018 at 9:44 PM, Ben Newlin <[email protected]>
wrote:
M4 will process the file before OpenSIPS runs and will not be
changeable at runtime. It sounds like that will not work for you if I
am understanding properly.
My first thought would be to use the shared variables from CFGUTILS
[1]. They can be accessed from inside the script, but can also be set
via MI. So when your monitor detects a failure and switches the IPs,
it could also use MI to change the value of the variable in OpenSIPS
for future use.
As a side note to OpenSIPS devs, it appears this module was missed
when the Module Index page [2] was redesigned as I can't find it
there for 2.x, but the direct links to the 2.x versions still work.
[1] http://www.opensips.org/html/docs/modules/2.4.x/cfgutils.html
[2] http://www.opensips.org/Documentation/Modules-2-4
Ben Newlin
On 8/2/18, 5:56 PM, "Users on behalf of [email protected]"
<[email protected] on behalf of
[email protected]> wrote:
Hello Liviu,
Yes, that correct. Right now each node in cluster have own vip
from
keepalived on LAN side.
The issue how to specify correct vip in case of failover, so if
node 2
fail and node 2 vip was relocated to node 1. All sessions should
be
process on node 1 and
append_hf("Path: <sip:$fU@MAIN_VIP:5060;transport=udp>\r\n");
should
have correct ip's. Same with rtpengine offer
rtpengine_offer("replace-origin replace-session-connection
in-iface=external out-iface=internal
media-address=$avp(media_addr)
RTP/AVP ICE=remove") where need introduce media-address to specify
correct vip ip.
Can you exapand on m4 ? I never used the templating.
Might db avp to predefine cluster nodes vip ip, not sure.
volga629
On Thu, Aug 2, 2018 at 10:50 AM, Liviu Chircu <[email protected]>
wrote:
> Hi Volga,
>
> If I understood your problem correctly, one idea would be to
use m4
> over opensips.cfg and define a different MAIN_VIP variable for
each
> of your three servers:
>
> append_hf("Path: <sip:$fU@MAIN_VIP:5060;transport=udp>\r\n");
> Liviu Chircu
> OpenSIPS Developer
> http://www.opensips-solutions.com
> On 09.07.2018 07:34, [email protected] wrote:
>> Hello Everyone,
>>
>> I have work around on this issue
>> # Work arround for github issue #1109
>> append_hf("Path: <sip:$fU@listen ip:5060;transport=udp>\r\n"
>>
>>
>> Right now we use 3 node cluster with 3 vips in active/active
mode
>> I need some idea how to determine path header listen ip
address from
>> 3 vips.
>>
>>
>> volga629
>>
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> [email protected]
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
