Hi Bogdan, No, nothing in OpenSIPS logs, unfortunately. Here's another log, I'm doing 'fix_nated_register' in this case at the REGISTER route and doing 'fix_nated_contact()' at the very beginning of my script, just for the testing purpose.
May 3 03:00:48 [REGISTER] [123456->123456] Forwarding REGISTER from sip:[email protected]:5060, requested Expries: 60 to main registrar at sip: 172.16.4.22:5060 (84327f479c5d50e1634422f72a0b7619) May 3 03:00:48 [REPLY] [123456->123456] REGISTER 401 Unauthorized FROM 172.16.4.22:5060 (84327f479c5d50e1634422f72a0b7619) May 3 03:00:48 [REGISTER] [123456->123456] Request from 1XX.1XX.1XX.1XX:8001, domain domain.com (84327f479c5d50e1634422f72a0b7619) May 3 03:00:48 [REGISTER] [123456->123456] Forwarding REGISTER from sip:[email protected]:5060, requested Expries: 60 to main registrar at sip: 172.16.4.22:5060 (84327f479c5d50e1634422f72a0b7619) May 3 03:00:48 [REPLY] [123456->123456] REGISTER 200 OK FROM 172.16.4.22:5060 (84327f479c5d50e1634422f72a0b7619) May 3 03:00:48 [REGREPLY] [123456->123456] Reply from 172.16.4.22:5060, code is 200 - OK, saving contact (84327f479c5d50e1634422f72a0b7619) May 3 03:00:48 [EVENT] Inserting contact sip:[email protected]:8001 (569f6c324981335e0b33daf8fc88ed77) May 3 03:00:51 [OPTIONS] OPTIONS request from 172.16.4.22:5060 to sip:[email protected]:5060, fu is sip:[email protected] May 3 03:00:51 [OPTIONS] [123456->123456] SIP device sip:[email protected] found, relaying to sip:1XX.1XX.1XX.1XX:8001 (76f4319976c85e45b2ff916581912550) No errors in OpenSIPS logs. Here's output of 'opensips-cli -x mi fifo ul_dump': "AORs": [ { "AOR": "123456", "Contacts": [ { "Contact": "sip:[email protected]:8001", "ContactID": "3713509073413807284", "Expires": 47, "Q": "", "Callid": "6_3941098626", "Cseq": 2, "User-agent": "Yealink SIP-T46G 28.83.0.120", "Received": "sip:1XX.1XX.1XX.1XX:8001", "State": "CS_SYNC", "Flags": 0, "Cflags": "", "Socket": "udp:1XX.1XX.1XX.1XX:5060", "Methods": 16383 } ] } Thanks and best regards, Yury. On Tue, May 3, 2022 at 12:29 AM Bogdan-Andrei Iancu <[email protected]> wrote: > Hi, > > Are there any errors when the "fixing" is done? The presence of a param > should not impact here. > > Regards, > Bogdan > > Bogdan-Andrei Iancu > > OpenSIPS Founder and Developer > https://www.opensips-solutions.com > OpenSIPS eBootcamp 23rd May - 3rd June 2022 > https://opensips.org/training/OpenSIPS_eBootcamp_2022/ > > On 4/29/22 1:43 PM, Yury Kirsanov wrote: > > Hi, > I'm using OpenSIPS 3.2.4 and recently run into following issue: > > Imagine simplest proxy setup - OpenSIPS just accepts new packet, for > example INVITE, changes destination using 'sethostport(....)' and then > issues 't_relay()' to forward the packet. Let's ignore replies and so on. > > If I'm doing a 'fix_nated_contact()' before sending this packet I'm > expecting Contact: field to be replaced with a source IP:port as per > manual. And this works if the Contact is in simple form like ' > sip:[email protected]:65033'. > > But if following Contact comes in OpenSIPS doesn't change it leaving > private IP in the contact: > > 'Contact: sip:[email protected]:65033;rinstance=2f59b175103f1088' > > Can you please let me know why is that happening? Thanks! > > Best regards, > Yury. > > _______________________________________________ > Users mailing > [email protected]http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > >
_______________________________________________ Users mailing list [email protected] http://lists.opensips.org/cgi-bin/mailman/listinfo/users
