On 2015-11-03 14:36, ioan stan wrote:
After # zpool import kirkwood, I could mount /sysroot and edit fstab.
And redsleeve came up just fine afterwords. Many thanks for your help.
Can I ask you another favour? Please help with uboot settings for
multiboot I have Debian 8 on internal microsd and I want to boot first
from sdb (1:1 Redsleeve). I’ll send you the current uboot settings
if you can help.
Awesome.
What I use on my DreamPlug is as follows:
baudrate=115200
bootargs=console=ttyS0,115200 root=ZFS=dreamplug/ROOT
bootcmd=usb start; ${loadImage}; ${loadInitrd} ; bootm 0x6400000
0x7400000
bootdelay=3
eth1addr=<your MAC1 here>
ethact=egiga0
ethaddr=<your MAC0 here>
loadImage=ext2load usb 0:4 0x6400000 uImage
loadInitrd=ext2load usb 0:4 0x7400000 uInitrd
machid=0xa63
stderr=serial
stdin=serial
stdout=serial
Presumably you have loadImage and loadInitrd referring to usb 1:4
instead.
You could do something like:
setenv bootcmd2 'usb start; ext2load usb 0:1 0x6400000 uImage; ext2load
usb 0:1 0x6400000 uInitrd; bootm 0x6400000 0x7400000'
saveenv
Then to boot debian:
run ${bootcmd2}
Assuming your Debian kernel and initrd can be found in the root
directory of usb 0:1. Otherwise adjust usb 0:1 and the uImage/uInitrd
names accordingly. ext2ls should help you find the correct device
designation and path/name of the relevant files.
Gordan
_______________________________________________
users mailing list
[email protected]
https://lists.redsleeve.org/mailman/listinfo/users
