Hi Nick, I also have a XU4. I got it working and made kerenel rpms for it, based on the vendor's binary stuff.
I could have sworn that I had already uploaded the image. I'll check when I'm home, now low bandwidth :( Jacco On 04/14/2016 12:22 PM, Nick Hardiman wrote: > >> On 2016-04-14 10:50, Nick Hardiman wrote: >>> I’m getting started with a new Odroid XU4 and RSEL6 minimal. I use >>> RHEL6- and 7-a-likes all the time, so makes sense to load up RSEL6 and >>> 7 on my new board. >>> What is the easiest way to create a bootable SD card for an Odroid XU4 >>> board? >>> So far, I assembled an SD card that includes: >>> * Samsung’s bootloader parts and u-boot >>> * boot fs from Ordroid’s supplied Ubuntu >>> * root fs from http://ftp.redsleeve.org/pub/el6-staging/rootfs/ >>> I haven’t got the magic formula quite right yet, because the kernel >>> gets as far as trying to open a nonexistant /etc/fstab and falls over. >>> Instead of fixing this build, maybe I should start with a different >>> type of build. >>> How would you guys build an SD card for an XU4? >> >> There is no better/easier way because that would require an image >> specific to XU4. What you need to do is edit the fstab to add the >> relevant entries. > > OK, I’ll work on this. Thanks. > >> Also, you haven't mentioned it, but you will need /lib/{modules,firmware} >> from the Ubuntu image for the kernel you got from there. > > Good point. I copied /lib/modules, I forgot /lib/firmware. > > > > _______________________________________________ > users mailing list > [email protected] > https://lists.redsleeve.org/mailman/listinfo/users > _______________________________________________ users mailing list [email protected] https://lists.redsleeve.org/mailman/listinfo/users
