On 07/03/2013 15:46, Daniel Buccoliero wrote: > To whom it may concern > > > > When I run a calculation in Scilab 5.3.2, I _round_ the results and > manipulate them to maintain only two or three decimals. Then I use the > _write_csv_ command to write the results to a file that Excel can read. > All works very nicely, the results would look like this,*0.146* > > > > When running the exact same calculations in Scilab 5.4.0 (with the exact > same scripts) however, the outcome has not only several decimals, but > the numbers come with an imaginary part as well, which by the way is 0, > i.e. the results look like this, *0.14599999999999 + 0i*. > > > > I’ve tried to use the newer version of _write_csv_, namely csvWrite, but > without any succes. Actually, write_csv in Scilab 5.4.0 is connected on csvwrite. There is just a different of default behavior (see the documentation on this subject).
Could you provide a test case which show the issue ? Thanks Sylvestre _______________________________________________ users mailing list [email protected] http://lists.scilab.org/mailman/listinfo/users
