Dear Alexander,
You may zoom on your curve to place your datatip more accurately.
There are five significant figures when you place a datatip, so if "Y:
1.1" is displayed, then it was closer to 1.1 than to 1.005.
Regards,
Paul.
On 10/31/2013 04:53 PM, Alexander Weinig wrote:
Dear Ms / Miss,
i have a question about using the datatips in Scilab's Xcos. I tried
to simulate a PID-Controller and i want to use some datatips. My
Problem is, that i need more decimal places for the Y-Axis. The
problem is only if the datatip is over "1". It would be most helpful
if there is a possibility to show the position of de datatip in a way
like this for example: "Y: 1.05" or "Y: 1.005" it only shows "Y: 1.1"
(not very)
For a better understanding look at the attechment.
Yours sincerely,
Alexander Weinig
alexander_wei...@yahoo.de
_______________________________________________
users mailing list
users@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users
--
Paul BIGNIER
Scilab Engineer & Xcos Developer
-----------------------------------------------------------
Scilab Enterprises
143bis rue Yves Le Coz - 78000 Versailles, France
Phone: +33.1.80.77.04.69
http://www.scilab-enterprises.com
_______________________________________________
users mailing list
users@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users
