Hi Peter, There is some external modules packaged in ATOMS which claim to handle real-time control [1] and others instrument control [2]. I did not used them so this is just pointers :) .
[1]: http://atoms.scilab.org/categories/real-time [2]: http://atoms.scilab.org/categories/instruments_control -- Clément Le lundi 10 mars 2014 à 11:54 -0700, pepe a écrit : > Dears, > > I am wonder what it is possible within Scilab to connect to embedded h/w. > How can I connect to my own hardware and firmware? My hw&firmware consists > of 32-bit fixed point MCU and low voltage motor control kit. I run my own > code there but I would like to connect it to eval, modify, measure it on > performance. So intention is to build small mini motor test bench where hw > (power electronics, controller, motor) is available and can modify firmware > in the way to communicate with Scilab. > > I am looking for answer as where to start, what look at, how to do real-time > control, etc... > > Best regards, > Peter > > > > -- > View this message in context: > http://mailinglists.scilab.org/Real-time-connect-embedded-hw-tp4029183.html > Sent from the Scilab users - Mailing Lists Archives mailing list archive at > Nabble.com. > _______________________________________________ > users mailing list > [email protected] > http://lists.scilab.org/mailman/listinfo/users _______________________________________________ users mailing list [email protected] http://lists.scilab.org/mailman/listinfo/users
