Hello, > De la part de Samuel Enibe > Envoyé : samedi 22 mars 2014 19:01 > > May I know the best way to determine dy/dx for the data set.
The best way is the way that gives you accurate results in the minimal time. If you have an analytical model, the best is to fit it and then derive the function, with numdiff(). You can otherwise perform a Savitzky-Golay smoothing, which also gives you the derivative, see e.g. https://commons.wikimedia.org/wiki/File:Savitzky-golay_pic_gaussien_bruite.svg?uselang=en If you excpect a very low noise, then you can assume the points are at their "exact" position. Then, if you suppose the second derivative is small, you can use a simple slope calculation such as yprime = diff(y)./diff(x) plot(x(1, $-1), yprime) which is the fastest method, but also the most sensitive to noise. If the second deriative is not negligible, you may use the spline interpolation proposed by Radovan, but you may just use the step yprime = splin(x, y) plot(x, yprime) Best regards. -- Christophe Dang Ngoc Chan Mechanical calculation engineer ______________________________________________________________________ This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error), please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. ______________________________________________________________________ _______________________________________________ users mailing list [email protected] http://lists.scilab.org/mailman/listinfo/users
