Hi there
I have generated some 60 seconds of (pink) noise, sampled at 48 kHz,
which I can fft to get a linear-frequency representation (predominantly
interested in 20 - 20k Hz).
If I plot this data on a log-frequency plot, then of course high
frequency spectrum plots look very noisy.
I need a fixed-point-per-octave (FPPO) transformation of my data so I
can study the spectrum better at higher frequencies with a more readable
trace of my frequency response data. I would be interested in for
example a 1/3 octave moving-average smoothing.
In effect, the FPPO technique utilizes a measurement time window that
varies as a function of frequency, utilizing a long time window at low
frequencies (for narrow frequency resolution) and a successively shorter
time window at high frequencies (but averaged through the entire 60
seconds).
Is FPPO available in Scilab? (Signal Processing Toolbox maybe?) ... I
cannot find it.
/Claus
P.S. You could see this PDF file for some pictures (go to page 6, Figure 4):
http://www.rationalacoustics.com/files/FFT_Fundamentals.pdf
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
_______________________________________________
users mailing list
[email protected]
http://lists.scilab.org/mailman/listinfo/users
