Hi, I'm using a fixed time step solver : Runge-Kutta 4(5).
I specified a time step in setup menu : Maximum step size = 0.1 (as explain in Scilab Help >> Xcos >> Solver >>Comparisons) In my diagram I have a 1/z block with an event clock input with a period of 0.1s My other blocks use the value obtained thanks to the 1/s block and other inputs to compute some output which are used as input at next time step for all blocks. I don't Understand why if I send values to the workspace with the Inherited option set to "yes", all the values are sampled with the time step 0.05 (1/2*0.1) except the value got thanks to the 1/z block. Questions : 1)-Why Scilab does not followto the Time step I specified in the setup menu? 2)-Why the inherited time step within my diagram is 2 times smaller than the one I specify ? 3)-How could I fixe a time step constant at 0.1s in all my diagram? Thanks Quentin Mazué -- View this message in context: http://mailinglists.scilab.org/Fixed-time-step-solver-Specify-the-time-step-tp4030948.html Sent from the Scilab users - Mailing Lists Archives mailing list archive at Nabble.com. _______________________________________________ users mailing list [email protected] http://lists.scilab.org/mailman/listinfo/users
