Hello Noguchi,
Try loosening the tolerances instead of tightening them.
With 1e-2, the simulation goes much further because the solver
disregards the results a lot more.
Hope this helps,
Regards,
Paul
On 01/11/2016 11:30 AM, noguchi wrote:
Thank you for your feedback.
I reduced solver tolerance from Simulation, Parameter settings as per
attached file.
I changed 1.0E-6 ==> 1.0E-12
However, I still get same error message.
May I ask your further help to solve this problem?
SCilab_Sim_Setting.jpg
<http://mailinglists.scilab.org/file/n4033262/SCilab_Sim_Setting.jpg>
--
View this message in context:
http://mailinglists.scilab.org/Scilab-users-Scilab-Error-Message-CVode-tp4033255p4033262.html
Sent from the Scilab users - Mailing Lists Archives mailing list archive at
Nabble.com.
_______________________________________________
users mailing list
users@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users
--
Paul BIGNIER
Development engineer
-----------------------------------------------------------
Scilab Enterprises
143bis rue Yves Le Coz - 78000 Versailles, France
Phone: +33.1.80.77.04.68
http://www.scilab-enterprises.com
_______________________________________________
users mailing list
users@lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users
