Thanks Christophe,
It means that some codes I made last few years are not available now
under Scilab6.0 :-(
A personal reflexion is in progress consequently ...
Paul
Le 2018-01-22 18:08, Dang Ngoc Chan, Christophe a écrit :
> Hello Paul,
>
>> De la part de Carrico, Paul
>> Envoyé : lundi 22 janvier 2018 15:09
>>
>> In the past, I used the following structure to develop my code on several
>> lines (until the release 5.5.2) ;
>> in the new one, the 3 dots do not work anymore.
>
> I also noticed some changes with the continuation dots, see :
>
> http://mailinglists.scilab.org/Scilab-users-Weird-things-with-the-continuation-dots-td4037181.html
>
> regards
>
> --
> Christophe Dang Ngoc Chan
> Mechanical calculation engineer
> This e-mail may contain confidential and/or privileged information. If you
> are not the intended recipient (or have received this e-mail in error),
> please notify the sender immediately and destroy this e-mail. Any
> unauthorized copying, disclosure or distribution of the material in this
> e-mail is strictly forbidden.
> _______________________________________________
> users mailing list
> [email protected]
> http://lists.scilab.org/mailman/listinfo/users
_______________________________________________
users mailing list
[email protected]
http://lists.scilab.org/mailman/listinfo/users
