The curve I would like to plot is similar to the one attached. There are several efficiency curves within a SPEEDxTORQUE chart. My problem comes down to a spreadsheet generated by external software where I have three columns: SPEED, TORQUE and EFFICIENCY. The data is all broken and so I have to put an efficiency range to get data of just one efficiency. In this case, I created a function that runs through this matrix to collect the SPEEDxTORQUE data for efficiency (interval) and that is why I have several points nearby that could be reduced to just one. These vectors that I sent initially correspond to only one of these curves, if I'm not mistaken it's the 94% efficiency curve. I was observing the function of contour curves and I thought it would be possible to apply, since I will have to paint the graphic in the future. But I don't know how to do that yet. It is worth mentioning that the points vary according to the efficiency range, that is, it is not possible to predict how many SPEEDxTORQUE points I will have.
<http://mailinglists.scilab.org/file/t498028/anexo1_1.png> -- Sent from: http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html _______________________________________________ users mailing list [email protected] http://lists.scilab.org/mailman/listinfo/users
