Yeah, it looks as if your BusyBox does not support the xfrm subcommand.
Either try to update to a more recent BusyBox or install setkey
from the ipsec-tools package instead:
setkey -D is similar to ip xfrm state
and
setkey -DP similar to ip xfrm policy
Regards
Andreas
Jessie Liu wrote:
> Hi Andreas,
>
> ip route list works fine on my target board. but ip xfrm state did
> not work.
>
> When I type "ip xfrm state",
> it shows the following messages:
>
> BusyBox v1.10.1 (2009-09-28 15:09:16 CST) multi-call binary
>
> Usage ip [OPTIONS] {address | route | link | tunnel | rule} {COMMAND}
>
>
>
> --- *09/9/30 (三)，Andreas Steffen /<[email protected]>/*
> 寫道：
>
>
> 寄件者: Andreas Steffen <[email protected]>
> 主旨: Re: [strongSwan] ip xfrm state / ip xfrm policy
> 收件者: "Jessie Liu" <[email protected]>
> 副本: [email protected]
> 日期: 2009年9月30日,三,下午12:32
>
> Hi Jessie,
>
> in the past there are some embedded platform which did not implement
> the ip xfrm command. Does e.g. "ip route list" work? If not then the
> whole iproute2 package is missing and you must install it first.
>
> Regards
>
> Andreas
>
> Jessie Liu wrote:
> > Hi all,
> > I'am trying to use " ip xfrm state " and " ip xfrm policy " command.
> > But I couldn't use that command to show information. There is no
> such command!
> > What else should I add in kernel config?
> > I already have xfrm4_tunnel.ko and xfrm_user.ko, but still cannot
> use that command.
> >
> > Thanks a lot. ^_______^
======================================================================
Andreas Steffen [email protected]
strongSwan - the Linux VPN Solution! www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==
_______________________________________________
Users mailing list
[email protected]
https://lists.strongswan.org/mailman/listinfo/users
