Hi Brian, the following line in ipsec.conf
charondebug="cfg 2" should do the job as the following example scenario shows: http://www.strongswan.org/uml/testresults5dr/ikev2/alg-blowfish/ Oct 6 19:46:41 moon charon: 04[CFG] received proposals: ESP:BLOWFISH_CBC_192/HMAC_SHA2_256_128/NO_EXT_SEQ 04[CFG] configured proposals: ESP:BLOWFISH_CBC_192/HMAC_SHA2_256_128/NO_EXT_SEQ, ESP:BLOWFISH_CBC_128/HMAC_SHA1_96/NO_EXT_SEQ 04[CFG] selected proposal: ESP:BLOWFISH_CBC_192/HMAC_SHA2_256_128/NO_EXT_SEQ Best regards Andreas On 10/16/2014 05:31 PM, Brian Watson wrote: > Hi, > I want to debug the following problem: > > 1. ipsec.conf has esp=aes256 > 2. I try to establish a VPN connection initiated by my handset and > StrongSwan responds with No Proposal Chosen > 3. I would like to see what the problem is by seeing what the proposals are. > 4. I set cfg, mgr, ike,esp,knl, etc to be equal to 4 in strongswan.conf > for filelog in order to get more detailed information from the logs, but > it still doesn't show the proposals. > > Any ideas as to what I might be doing wrong? > > Thanks, > Brian > ====================================================================== Andreas Steffen [email protected] strongSwan - the Open Source VPN Solution! www.strongswan.org Institute for Internet Technologies and Applications University of Applied Sciences Rapperswil CH-8640 Rapperswil (Switzerland) ===========================================================[ITA-HSR]==
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
