That did it. Thanks! On Thu, Oct 16, 2014 at 11:37 AM, Andreas Steffen < [email protected]> wrote:
> Hi Brian, > > the following line in ipsec.conf > > charondebug="cfg 2" > > should do the job as the following example scenario shows: > > http://www.strongswan.org/uml/testresults5dr/ikev2/alg-blowfish/ > > Oct 6 19:46:41 moon charon: > 04[CFG] received proposals: > ESP:BLOWFISH_CBC_192/HMAC_SHA2_256_128/NO_EXT_SEQ > 04[CFG] configured proposals: > ESP:BLOWFISH_CBC_192/HMAC_SHA2_256_128/NO_EXT_SEQ, > ESP:BLOWFISH_CBC_128/HMAC_SHA1_96/NO_EXT_SEQ > 04[CFG] selected proposal: > ESP:BLOWFISH_CBC_192/HMAC_SHA2_256_128/NO_EXT_SEQ > > Best regards > > Andreas > > On 10/16/2014 05:31 PM, Brian Watson wrote: > > Hi, > > I want to debug the following problem: > > > > 1. ipsec.conf has esp=aes256 > > 2. I try to establish a VPN connection initiated by my handset and > > StrongSwan responds with No Proposal Chosen > > 3. I would like to see what the problem is by seeing what the proposals > are. > > 4. I set cfg, mgr, ike,esp,knl, etc to be equal to 4 in strongswan.conf > > for filelog in order to get more detailed information from the logs, but > > it still doesn't show the proposals. > > > > Any ideas as to what I might be doing wrong? > > > > Thanks, > > Brian > > > ====================================================================== > Andreas Steffen [email protected] > strongSwan - the Open Source VPN Solution! www.strongswan.org > Institute for Internet Technologies and Applications > University of Applied Sciences Rapperswil > CH-8640 Rapperswil (Switzerland) > ===========================================================[ITA-HSR]== > >
_______________________________________________ Users mailing list [email protected] https://lists.strongswan.org/mailman/listinfo/users
