Hi,
no time to test this, but my guess from yazids las post is:
he had put a tc:out and a tc:selectOneChoice in the same column.
the tc:selectOneChoice was rendered but outside the columns visual
area and therefore clipped away.
surrounding the tc:out and tc:selectOneChoice with a tc:cell (or panel)
may solve this.
btw: if you put more than on components direct into a column you get
warning in the logs about layout problems (width of component can't
set).
Regards,
Volker
2008/2/15, Arvid Hülsebus <[EMAIL PROTECTED]>:
> Hello
>
> Like Udo I tried to reproduce the problem, but I failed, too. On my test
> page the tc:selectOneChoice gets rendered without any problem.
>
> Perhaps you can set up a small page, where this problem occurs. It
> shouldn't be necessary to add a tc:cell just to get the
> tc:selectOneChoice appear in the broswer.
>
> Thanks in advance,
>
> Arvid
>
>
> yazid wrote:
> > Hi
> > I found out....I'm using a <tc:out with <tc:selectOneChoice ...inside a
> > column.
> > just put them in a cell.
> > tx
> >
> > yazid wrote:
> >
> >> Hi All;
> >> I've migrated last week to 1.0.15; most of component are OK, except for
> >> "<tc:selectOneChoice" inside a sheet columns, it's not rendred at all....
> >>
> >> <tc:column label=.....
> >> <tc:selectOneChoice value="#{b.name}" >
> >> <f:selectItems value="#{b.items}" />
> >> </tc:selectOneChoice>
> >>
> >> Is that a bug in 1.0.15 or should I do a special use of select...
> >> Thanks
> >>
> >>
> >>
> >>
> >
> >
>
--
inexso - information exchange solutions GmbH
Bismarckstraße 13 | 26122 Oldenburg
Tel.: +49 441 4082 356 |
FAX: +49 441 4082 355 | www.inexso.de
