crazy. let me check that. It would be odd if the source release of an open source project has an issue...
-Matthias On Tue, Jul 1, 2008 at 5:01 PM, Gerard Donnelly <[EMAIL PROTECTED]> wrote: > Hi Matthias, > > I've checked out both 1.2.7 and 1.2.8. > > Both fail in the same way. Clean and install works with an empty > repository. > It then fails on an immediate rerun. > > The failure occurs for Trinidad-impl with the test issues below. > > G > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > Matthias Wessendorf > Sent: 01 July 2008 13:28 > To: MyFaces Discussion > Subject: Re: [trinidad] Issues building 1.2.8 > > ****** This Message Originated From The Internet Please Be Aware Of > Suspicious Attachments And Content ****** > > Hi, > > On Tue, Jul 1, 2008 at 2:23 PM, Gerard Donnelly > <[EMAIL PROTECTED]> wrote: >> Hi All, >> >> I downloaded the 1.2.8 source zip and was able to build (using a clean >> repository) with 'mvn clean install'. > > so, when you delete the repo it works ? > >> >> However, if I immediately try to rebuild it fails with the following >> test errors: > > that means with an existing repo it doesn't work ? > Strange. Can you test 1.2.7 as well ? > > > PS: does the SVN checckout work for you ? > > -M > >> >> >> > initializationError0(org.apache.myfaces.trinidadinternal.renderkit.CoreR >> enderKitTest) >> >> > testEscapeInQuoteJS(org.apache.myfaces.trinidadinternal.ui.laf.base.xhtm >> l.XhtmlLafUtilsTest) >> >> > testDoubleEscapeInQuoteJS(org.apache.myfaces.trinidadinternal.ui.laf.bas >> e.xhtml.XhtmlLafUtilsTest) >> >> I saw somewhere that 'mvn compile' should be used. I've tried this too >> but still end up with the same result. >> >> Any advice greatly appreciated. >> >> Thanks, >> Gerry >> >> >> P Please consider the environment before printing this email >> _________________________________________________________ >> >> 1. The information contained in this E-mail, including any files > transmitted with it, is confidential and may be legally privileged. This > E-mail is intended only for the personal attention of the stated > addressee(s). Any access to this E-mail, including any files transmitted > with it, by any other person is unauthorised. If you are not an > addressee, you must not disclose, copy, circulate or in any other way > use or rely on the information contained in this E-mail or any files > transmitted with it. Such unauthorised use may be unlawful. If you have > received this E-mail in error, please inform the sender immediately and > delete it and all copies from your system. You may not forward this > E-mail without the permission of the sender. >> >> 2. The views expressed in this E-mail are those of the author, and do > not necessarily represent the views of AMT-SYBEX. Internet > communications are not secure and AMT-SYBEX cannot, therefore, accept > legal responsibility for the contents of this message nor for any damage > caused by viruses. >> >> AMT-SYBEX Limited is a UK company, registration number GB03036807 at > address The Spirella Building, Bridge Road, Letchworth, SG6 4ET. >> AMT-SYBEX (NI) Limited is a UK company, registration number NI024104 > at address Edgewater Office Park, Edgewater Rd, Belfast, BT3 9JQ. >> For more information on the AMT-SYBEX Group visit > http://www.amt-sybex.com >> _________________________________________________________ >> > > > > -- > Matthias Wessendorf > > further stuff: > blog: http://matthiaswessendorf.wordpress.com/ > sessions: http://www.slideshare.net/mwessendorf > mail: matzew-at-apache-dot-org > > > > P Please consider the environment before printing this email > -- Matthias Wessendorf further stuff: blog: http://matthiaswessendorf.wordpress.com/ sessions: http://www.slideshare.net/mwessendorf mail: matzew-at-apache-dot-org
