Well, looks like the DTD for some XMLs are validated via internet, like facelets.
-M On Tue, Jul 1, 2008 at 7:18 PM, Gerard Donnelly <[EMAIL PROTECTED]> wrote: > Yes, behind a firewall. The setting has the correct proxy - configed as > below. There were no other changes to settings.xml. > > <proxy> > <id>main_proxy</id> > <active>true</active> > <protocol>http</protocol> > <host>XXX.X.XXX.XXX</host> > <port>8080</port> > <nonProxyHosts>localhost, 127.0.0.1</nonProxyHosts> > </proxy> > > Wouldn't an incorrect proxy prevent the initial build? Leave the > repository empty? > > I have another project using 1.0.8 and there are no issues building it. > > G > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > Matthias Wessendorf > Sent: 01 July 2008 17:51 > To: MyFaces Discussion > Subject: Re: [trinidad] Issues building 1.2.8 > > It works for me... > > Looking at the TXT, I see: > java.net.ConnectException: Connection timed out: connect > at java.net.PlainSocketImpl.socketConnect(Native Method) > > You are behind a firewall, right ? > Is there any chance that your settings.xml is just wrong ? > Like, wrong proxy, etc ? > > -Matthias > > On Tue, Jul 1, 2008 at 6:41 PM, Gerard Donnelly > <[EMAIL PROTECTED]> wrote: >> Crazy indeed. Which is why I'm guessing it's just me. ;-) >> >> I've attached the surefire reports if it helps. >> >> G >> >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of >> Matthias Wessendorf >> Sent: 01 July 2008 17:36 >> To: MyFaces Discussion >> Subject: Re: [trinidad] Issues building 1.2.8 >> >> crazy. >> let me check that. It would be odd if the source release of an open >> source project has an issue... >> >> -Matthias >> >> On Tue, Jul 1, 2008 at 5:01 PM, Gerard Donnelly >> <[EMAIL PROTECTED]> wrote: >>> Hi Matthias, >>> >>> I've checked out both 1.2.7 and 1.2.8. >>> >>> Both fail in the same way. Clean and install works with an empty >>> repository. >>> It then fails on an immediate rerun. >>> >>> The failure occurs for Trinidad-impl with the test issues below. >>> >>> G >>> >>> >>> -----Original Message----- >>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf >> Of >>> Matthias Wessendorf >>> Sent: 01 July 2008 13:28 >>> To: MyFaces Discussion >>> Subject: Re: [trinidad] Issues building 1.2.8 >>> >>> ****** This Message Originated From The Internet Please Be Aware Of >>> Suspicious Attachments And Content ****** >>> >>> Hi, >>> >>> On Tue, Jul 1, 2008 at 2:23 PM, Gerard Donnelly >>> <[EMAIL PROTECTED]> wrote: >>>> Hi All, >>>> >>>> I downloaded the 1.2.8 source zip and was able to build (using a >> clean >>>> repository) with 'mvn clean install'. >>> >>> so, when you delete the repo it works ? >>> >>>> >>>> However, if I immediately try to rebuild it fails with the following >>>> test errors: >>> >>> that means with an existing repo it doesn't work ? >>> Strange. Can you test 1.2.7 as well ? >>> >>> >>> PS: does the SVN checckout work for you ? >>> >>> -M >>> >>>> >>>> >>>> >>> >> > initializationError0(org.apache.myfaces.trinidadinternal.renderkit.CoreR >>>> enderKitTest) >>>> >>>> >>> >> > testEscapeInQuoteJS(org.apache.myfaces.trinidadinternal.ui.laf.base.xhtm >>>> l.XhtmlLafUtilsTest) >>>> >>>> >>> >> > testDoubleEscapeInQuoteJS(org.apache.myfaces.trinidadinternal.ui.laf.bas >>>> e.xhtml.XhtmlLafUtilsTest) >>>> >>>> I saw somewhere that 'mvn compile' should be used. I've tried this >> too >>>> but still end up with the same result. >>>> >>>> Any advice greatly appreciated. >>>> >>>> Thanks, >>>> Gerry >>>> >>>> >>>> P Please consider the environment before printing this email >>>> _________________________________________________________ >>>> >>>> 1. The information contained in this E-mail, including any files >>> transmitted with it, is confidential and may be legally privileged. >> This >>> E-mail is intended only for the personal attention of the stated >>> addressee(s). Any access to this E-mail, including any files >> transmitted >>> with it, by any other person is unauthorised. If you are not an >>> addressee, you must not disclose, copy, circulate or in any other way >>> use or rely on the information contained in this E-mail or any files >>> transmitted with it. Such unauthorised use may be unlawful. If you >> have >>> received this E-mail in error, please inform the sender immediately >> and >>> delete it and all copies from your system. You may not forward this >>> E-mail without the permission of the sender. >>>> >>>> 2. The views expressed in this E-mail are those of the author, and > do >>> not necessarily represent the views of AMT-SYBEX. Internet >>> communications are not secure and AMT-SYBEX cannot, therefore, accept >>> legal responsibility for the contents of this message nor for any >> damage >>> caused by viruses. >>>> >>>> AMT-SYBEX Limited is a UK company, registration number GB03036807 at >>> address The Spirella Building, Bridge Road, Letchworth, SG6 4ET. >>>> AMT-SYBEX (NI) Limited is a UK company, registration number NI024104 >>> at address Edgewater Office Park, Edgewater Rd, Belfast, BT3 9JQ. >>>> For more information on the AMT-SYBEX Group visit >>> http://www.amt-sybex.com >>>> _________________________________________________________ >>>> >>> >>> >>> >>> -- >>> Matthias Wessendorf >>> >>> further stuff: >>> blog: http://matthiaswessendorf.wordpress.com/ >>> sessions: http://www.slideshare.net/mwessendorf >>> mail: matzew-at-apache-dot-org >>> >>> >>> >>> P Please consider the environment before printing this email >>> >> >> >> >> -- >> Matthias Wessendorf >> >> further stuff: >> blog: http://matthiaswessendorf.wordpress.com/ >> sessions: http://www.slideshare.net/mwessendorf >> mail: matzew-at-apache-dot-org >> > > > > -- > Matthias Wessendorf > > further stuff: > blog: http://matthiaswessendorf.wordpress.com/ > sessions: http://www.slideshare.net/mwessendorf > mail: matzew-at-apache-dot-org > -- Matthias Wessendorf further stuff: blog: http://matthiaswessendorf.wordpress.com/ sessions: http://www.slideshare.net/mwessendorf mail: matzew-at-apache-dot-org
