Hello, Thanks for the response, I will try to configure failure retry in the FetchSFTP module.
Regards, Ben On Mon, Jun 27, 2022 at 7:07 PM Mark Payne <[email protected]> wrote: > Ben, > > The Wait processor is not intended for this purpose. It’s intended to be > used along with the Notify processor. So the processor will block FlowFiles > going forward until the Notify processor indicates that the FlowFile should > be released. > > Take a look at ListSFTP’s “Minimum File Age” property. You can set that to > say 1 minute. That will avoid listing the file until it’s at least 1 minute > old. > > Or, alternatively, you can configure FetchSFTP to retry failures and set > the Penalty Duration to 1 minute. That way, if it fails, it will wait 1 > minute and try again, up to the configured number of retries. > > Thanks > -Mark > > > > On Jun 26, 2022, at 6:31 AM, Ben .T.George <[email protected]> > wrote: > > > > Hello, > > > > How to configure the wait process along with ListSFTP process because > before fetching the file i need to run a schedule to change the permission > of the file which runs every minute. > > > > <image.png> > > > > Regards, > > Ben > > -- Yours Sincerely Ben.T.George Phone : +965 - 50629829 / 94100799 *" Live like you will die tomorrow, learn like you will live forever "*
