Joe Conner wrote:
I use an HP LASERJET 1100 and I had to lie to the printer setup in OOo
to get it to work. While I physically feed #10 envelopes on end in the
center, I had to tell OOo that I feed the envelope from the right.
Joyce McClure wrote:
I spent hours trying to get my HP Photosmart AllinOne to print
envelopes and had many e-mails with HP tech support. When they were
able to help me print a proper envelope in Word '97 they were done.
The printer would not print No 10's or any other size envelopes from
card programs that I had used for years. I purchased a second
printer, an inexpensive Epson, just to do envelopes. So I conclude it
is an HP problem but one they cannot help us with.
Joyce
----- Original Message ----- From: "marleen evans" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, July 29, 2007 1:16 PM
Subject: [users] Printing envelopes
I have a MacBook laptop (new) , am using openoffice.org.2.2, and an
HPPhotosmart (C6180 All-In -One )Printer. The printer will not print
envelopes developed in openoffice even though I have checked to make
sure I have designated #10 envelope in properties, loaded the
envelope correctly. The printer says papersize doesn't match or
various other error messages. I had my new printer checked out and
they say it is a software problem. I would appreciate any help you
can give. Thanks. Marleen
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
After some extensive struggles I discovered that the envelope size must
be set with the Printer Setup button on the Printer Tab of the Envelope
print dialog box; one must define and save a document definition here
and than things work out. For some reason OOo does not pass the
requisite information to the printer driver unless the size is set on
that Printer Setup screen. YMMV
--
Ron Miller, Baltimore, MD, USA
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
