Hi , I have done some tests in the environment below. PC1: sipp PC2: openser+mediaproxy (NAT) script: nat-mediaproxy.5.0.cfg from configs.GettingStarted.tar.gz
Below is the testing parameter shown in sipp 3 calls / second concurrent call: 30 Over 30 concurrent calls, message 481 begins to happen. The CPU usage of PC2 is almost 90% and then PC2 will hang. As I expect openser should handle over thousand of calls but there is a different between my testing. What I miss to configure for getting more concurrent call? On 5/26/06, Daniel-Constantin Mierla <[EMAIL PROTECTED]> wrote:
On 05/26/06 04:33, unplug wrote: > Hi, > How about using openser to handle over several hundred calls per > second? Very important is your configuration script. If you run openser just as a simple proxy, then it can go up to thousands of call setups per second. The performances increase if you use it in stateless mode - suitable for load balancing/dispatching. The only way to measure the real capacity of your platform is to set it up in a lab and then perform some tests using tools like sipp. Daniel > If not possbile, what is the limitation of openser to handle > call? > > On 5/26/06, Daniel-Constantin Mierla <[EMAIL PROTECTED]> wrote: >> Hello, >> >> On 05/25/06 07:26, Script Head wrote: >> > Hello, >> > >> > I am deploying OpenSER to distribute calls for a number of Asterisk >> > boxes. I believe there are some people on this list to have a similar >> > setup. I'd like to know what kind of hardware do you guys run OpenSER >> > on and how many calls per second can you set up with your specs. I am >> > looking to set up about 30-40 calls per second so I was wondering what >> > kind of hardware I'd need. >> a usual pc nowadays should do it without any problems. The amount of >> registered users influence the memory usage, the 30-40 call setups per >> second has no big impact in the system. >> >> Cheers, >> Daniel >> >> > >> > ScriptHead >> > >> ------------------------------------------------------------------------ >> > >> > _______________________________________________ >> > Users mailing list >> > [email protected] >> > http://openser.org/cgi-bin/mailman/listinfo/users >> > >> >> _______________________________________________ >> Users mailing list >> [email protected] >> http://openser.org/cgi-bin/mailman/listinfo/users >> >
_______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
