Cseke Tamas wrote:
Hi,
When sends openser accounting packets for INVITE, and BYE message?
it seems to be, when received 200 OK.
1)for INVITE i need radius packet immediately, not just when it was
answered.
you can send a acc request manually.
http://www.openser.org/docs/modules/1.1.x/acc.html#AEN669
2)for BYE i need accounting packet, when any error occured too.
you have to configure and set the failed transactions flag
http://www.openser.org/docs/modules/1.1.x/acc.htmlfailed
modparam("acc", "radius_flag", 2)
modparam("acc", "radius_missed_flag", 3)
this attribute mean that, should sent radius packet, when any error
occured too, isn't it? However openser don't send accounting packet in
no: missed != failed
this case.
i run into the following error:
##########
T called -> openser
BYE sip:21.16.8.92:5060
##
T openser->called
SIP/2.0 477 Unfortunately error on sending to next hop occurred (477/TM)
##########
T caller->openser
BYE sip:[EMAIL PROTECTED]:5060;
openser tries to open a TCP connection but it fails as there is nobody
listening on the specified remote socket.
regards
klaus
#####
# openser -> caller
SIP/2.0 481 Call Leg/Transaction Does Not Exist..
So no 200 OK for BYE received, therefore no accounting packet to radius
sent.
How can i solve these problems?
Btw, what could cause this 477 error?
Thanks,
Tamas
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
