Hi. I will do it Daniel. Thanks for the information.
About the tests, I am currently using 8 sipp instances (4 in each machine) and I am pretty closer to the performance you gained. I will try Openser 64 bit. Thanks again. Kind regards. Sergio G. On 3/21/07, Daniel-Constantin Mierla <[EMAIL PROTECTED]> wrote:
Hello, On 03/21/07 21:44, Sergio Gutierrez wrote: > Hi Daniel. > > Some time ago, I tried to compile Openser for 64 bits, but I had > problems with libradiusclient, when It was compiled for 64 bits. > > Is that problem solved? Could I run Openser + MySQL + Radius support > compiled as 64 bit? haven't tried myself, but as I could see, there were several fixes for libradiusclient on 64b. You should give another try. Cheers, Daniel > > Kind regards. > > Sergio G. > > On 3/21/07, *Daniel-Constantin Mierla* <[EMAIL PROTECTED] > <mailto: [EMAIL PROTECTED]>> wrote: > > Hello, > > On 03/21/07 20:14, Sergio Gutierrez wrote: > > Hi Daniel. > > > > I am repeating the test using 6 instances of SIPp, and I am having a > > better performance. > > > > A question. In the page you have listed that the Proxy and UAS > runs on > > a 64 bit machine. Was the compilation done to generate a 64 bit > > executable? > yes, it was 64bit executable. OS is Debian amd64. > > Cheers, > Daniel > > > > > Thanks. > > > > Kind regards. > > > > Sergio Gutierrez > > > > On 3/21/07, *Sergio Gutierrez* <[EMAIL PROTECTED] > <mailto: [EMAIL PROTECTED]> > > <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>> wrote: > > > > Hi Daniel. > > > > Thanks for your answer. > > > > My configs are as the same used in published tests, and my > UAS, as > > described is another instance of Openser. > > > > I will try what you sugest. > > > > Thanks. > > > > Sergio Gutiérrez. > > > > > > On 3/21/07, *Daniel-Constantin Mierla* < > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > <mailto: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>> wrote: > > > > Hello, > > > > do you use same configs as in published tests? The UAS > is another > > openser with just sending a 200 ok reply or sipp with uas > > scenario? > > > > First check what is the capacity of sipp -- make a very > simple > > config > > with just sl_send_reply("200","ok") in main route and start > > sipp. See > > what results you get and that should be the reference > for sipp > > capacity. > > Also, try to use multiple instances of sipp, from different > > servers, see > > if you get the cumulative value better. > > > > The tests were done on Core2 processor, and parallel > execution of > > openser processes has some impact as well. > > > > Cheers, > > Daniel > > > > > > On 03/21/07 16:52, Sergio Gutierrez wrote: > > > Hi. > > > > > > Currently I am installing Openser 1.2.0 on a Sun Fire > T2000 > > running > > > Solaris 10. > > > Although I used an optimized version of GCC for SPARC > > Systems, and > > > used the recommended settings to generate accurate > code for my > > > Processor (UltraSPARC T1), the results of the performance > > tests are > > > just 50% of the presented ones on the web page. > > > > > > My setup is the following: > > > > > > Proxy and UAS: Sun Fire T2000, 8 GB RAM, 1 UltraSPARC > T1 1.2 > > GHZ 6 Core. > > > UAC's: Two domain of a Sun Fire 12K, 4 GB RAM, 4 UlraSPARC > > III+ 900 Mhz > > > Software versions listed as on the webpage. > > > > > > openser -V output: > > > version: openser 1.2.0-notls (sparc/solaris) > > > flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, > USE_MCAST, > > > SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, > > FAST_LOCK-ADAPTIVE_WAIT-NOSMP > > > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, > > MAX_LISTEN 16, > > > MAX_URI_SIZE 1024, BUF_SIZE 65535 > > > poll method support: poll, select, /dev/poll. > > > svnrevision: unknown > > > @(#) $Id: main.c 1827 2007-03-12 15:22:53Z bogdan_iancu $ > > > main.c compiled on 21:43:51 Mar 19 2007 with gcc 4.0.3 > > > > > > > > > I would thank any idea about how could I improve the > > performnace of my > > > setup. I think that because of the hardware > specifications, > > the result > > > should be at least equal than listed. > > > > > > Thanks in advance. > > > > > > Kind regards. > > > > > > Sergio Gutiérrez. > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > Users mailing list > > > [email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto: [email protected]>> > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > >
_______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
