> > If I keep my ovirtmgmt interface on a 100Mbps subnet, and my VM > Networks on 1Gbps network, there's anything special I have to do in > routing or anything to prevent traffic of the VMs from following the > default route defined in ovirtmgmt? > > I'm also experiencing an issue with bonds that may be related. I > create the bond and set to Mode 5, yet the ifcfg-bond0 seems to > reflect Mode 4. > > DEVICE=bond0 > ONBOOT=yes > BOOTPROTO=none > BONDING_OPTS='mode=802.3ad miimon=150' > NM_CONTROLLED=no > MTU=9000 > > > Here's what looks relevant in the vdsm.log > > > Thread-55232::DEBUG::2012-06-22 > 16:56:56,242::BindingXMLRPC::872::vds::(wrapper) client > [128.194.76.185]::call setupNetworks with ({'stor0': {'bonding': > 'bond0', 'bridged': 'false', 'mtu': '9000'}}, {'bond0': {'nics': > ['eth3', 'eth2'], 'BONDING_OPTS': 'mode=5'}}, {'connectivityCheck': > 'true', 'connectivityTimeout': '60000'}) {} flowID [39d484a3] > Thread-55233::DEBUG::2012-06-22 > 16:56:56,242::BindingXMLRPC::872::vds::(wrapper) client > [128.194.76.185]::call ping with () {} flowID [39d484a3] > Thread-55233::DEBUG::2012-06-22 > 16:56:56,244::BindingXMLRPC::879::vds::(wrapper) return ping with > {'status': {'message': 'Done', 'code': 0}} > MainProcess|Thread-55232::DEBUG::2012-06-22 > 16:56:56,270::configNetwork::1061::setupNetworks::(setupNetworks) > Setting up network according to configuration: networks:{'stor0': > {'bonding': 'bond0', 'bridged': 'false', 'mtu': '9000'}}, > bondings:{'bond0': {'nics': ['eth3', 'eth2'], 'BONDING_OPTS': > 'mode=5'}}, options:{'connectivityCheck': 'true', > 'connectivityTimeout': '60000'} > MainProcess|Thread-55232::DEBUG::2012-06-22 > 16:56:56,270::configNetwork::1065::root::(setupNetworks) Validating > configuration > Thread-55234::DEBUG::2012-06-22 > 16:56:56,294::BindingXMLRPC::872::vds::(wrapper) client > [128.194.76.185]::call ping with () {} flowID [39d484a3] > Thread-55234::DEBUG::2012-06-22 > 16:56:56,295::BindingXMLRPC::879::vds::(wrapper) return ping with > {'status': {'message': 'Done', 'code': 0}} > MainProcess|Thread-55232::DEBUG::2012-06-22 > 16:56:56,297::configNetwork::1070::setupNetworks::(setupNetworks) > Applying... > MainProcess|Thread-55232::DEBUG::2012-06-22 > 16:56:56,297::configNetwork::1099::setupNetworks::(setupNetworks) > Adding network 'stor0' > MainProcess|Thread-55232::DEBUG::2012-06-22 > 16:56:56,322::configNetwork::582::root::(addNetwork) validating > bridge... > MainProcess|Thread-55232::INFO::2012-06-22 > 16:56:56,323::configNetwork::591::root::(addNetwork) Adding network > stor0 with vlan=None, bonding=bond0, nics=['eth3', 'eth2'], > bondingOptions=None, mtu=9000, bridged=False, options={} > > > Looking at the code I may see where things are going wrong. Looks > like network['bonding']['BONDING_OPTS'] is being passed when the code > is looking for network['bonding']['options'].
Yes indeed, this bug was fixed and should be available in next release of oVirt. > > - Trey > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users