On 12/28/2012 3:25 PM, Jonathan Horne wrote:
ok, i started over on my ovirt cluster here. now that i have built a new
data center and modified my ovirtmgmt network (to be tagged as vlan 3200),
if i try to edit the interface to create a bond, ovirtmgmt does not move
to the right side so i can reassign it to the new bond interface, it
disappears all together.
so then i cancel. i go back into the edit host networks window, and this
time i just assign my iscsi vlan to the other interface, check for static
on both, and then click ok. but ovirt deletes the ovirtmgmt interface
off the node and i lose the node from the network.
very strange the the ovirtmgmt network disappears :(
I have not tried any bonding. What version are you running? I don't
think I've ever actually tried to configure the ovirtmgmt network with
the GUI. I would assume that it's supposed to work but I can't confirm
that. I either manually configure it the way I want it on a plain
Fedora install or use the TUI on initial Node setup. I know there have
been fixes between 3.1 and the 3.2 alpha (3.1 just didn't work for me at
all). Perhaps there were bonding problems that have been corrected. If
you can, you might want to hang on to the logs (engine and vdsm) from
the time you tried to change the network config.
On 12/27/12 5:42 PM, "Jeff Bailey" <bai...@cs.kent.edu> wrote:
On 12/27/2012 6:10 PM, Jonathan Horne wrote:
On 12/27/12 2:57 PM, "Jeff Bailey" <bai...@cs.kent.edu> wrote:
On 12/27/2012 3:01 PM, Jonathan Horne wrote:
if someone could help me confirm, but it appear that i cannot
co-populate tagged vlan on the same interface as ovirtmgmt?
You can but you need to edit the ovirtmgmt network to make it tagged
before adding a cluster to the datacenter.
It tells me "cannot edit management network".
If there is already a cluster attached to the datacenter then you can't
edit the ovirtmgmt network. You may be able to create another temporary
datecenter, move your cluster, edit the network and then move the
cluster back. If you edit the network before adding a cluster and hosts
then it's easier. I'm not sure you'll be able to move the cluster
though. I haven't tried that. If you can't then you'll probably have
to remove the hosts and cluster and add them back afterwards. There has
been recent discussion about improving this situation so in the future
this may not be a problem.
for me it would really be better if i can share these 2 on same
interface, but if i can't ill just have to live with it.
can any one confirm this?
thanks,
jonathan
-----------------------------------------------------------------------
-
This is a PRIVATE message. If you are not the intended recipient,
please delete without copying and kindly advise us by e-mail of the
mistake in delivery. NOTE: Regardless of content, this e-mail shall
not operate to bind SKOPOS to any order or other contract unless
pursuant to explicit written agreement or government initiative
expressly permitting the use of e-mail for such purpose.
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
________________________________
This is a PRIVATE message. If you are not the intended recipient,
please delete without copying and kindly advise us by e-mail of the
mistake in delivery. NOTE: Regardless of content, this e-mail shall not
operate to bind SKOPOS to any order or other contract unless pursuant to
explicit written agreement or government initiative expressly permitting
the use of e-mail for such purpose.
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
________________________________
This is a PRIVATE message. If you are not the intended recipient, please delete
without copying and kindly advise us by e-mail of the mistake in delivery.
NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to
any order or other contract unless pursuant to explicit written agreement or
government initiative expressly permitting the use of e-mail for such purpose.
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
