----- Original Message ----- > From: "Alex Leonhardt" <[email protected]> > To: "oVirt Mailing List" <[email protected]> > Sent: Wednesday, March 6, 2013 12:42:06 PM > Subject: Re: [Users] Adding a bond.vlantag to ovirt-node > > > > Sorry, the picture should actually say br2 :) ... have had to edit it > to protect the real name(s) ... > > Alex > > > > > On 6 March 2013 11:39, Alex Leonhardt < [email protected] > wrote: > > > > > > > > > All, > > I've added manually a bond.<vlantag> to a Hyper-Visor, then added a > bridge and slaved bond.<vlantag> to it. > > I've upped the interfaces (no IPs), however ovirt-engine still wont > allow me to add the new bridged interface. I did this yesterday, so > I thought, maybe it's just a cache issue, however, it doesnt seem to > update the HVs network config periodically ?
What does the engine say when you try to add it? The message could give us a good hint. > > What can I do to get this sorted ?? I dont want to have to restart > the networking as VMs are running and needed. > > FWIW, the setup looks like this - > > > eth0 > | ----- bond0.111 --- br1 > | ----- bond0.112 --- ovirtmgmt > > > eth1 > > > > > > the change was : > > eth0 > | ----- bond0.111 --- br1 > | ----- bond0.112 --- ovirtmgmt > | ----- bond0.113 --- br2 > eth1 > > > I then added "br2" to the ovirt-engine config, however, I'm not able > to assign it to bond in the network config (web admin interface) for > the hyper visor / host. > > > > Also see screenshot attached. > > > Thanks > Alex > > > > > -- > > > > | RHCE | Senior Systems Engineer | www.vcore.co | > | www.vsearchcloud.com | > > > > -- > > > > | RHCE | Senior Systems Engineer | www.vcore.co | > | www.vsearchcloud.com | > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
