Hi, vlan tagging for ovirtmgmt interface is a bit tricky.
Here's how I do it: - configure vlan tag on host(s) and switch - imho not necessary to have a ovirtmgmt bridge available but vlan tagging configured for your ovirtmgmt network on your ethx or bondx interface - create a new datacenter (without hosts in it!) - edit ovirtmgmt logical network (if it's not possible: delete it and create new interface ovirtmgmt with vlan tag) - put host(s) in new datacenter - configure network from oVirt webadmin gui (maybe you have to uncheck "verify connectivity between engine and hosts") I can't say for sure if the steps above will work - maybe you have to do more directly on the host. Did a few setups with tagged ovirtmgmt interfaces in oVirt and RHEV but newer wrote down a definitive guide for it :( Regards, René -----Original message----- > From:Juan Pablo Lorier <[email protected]> > Sent: Wednesday 8th May 2013 21:14 > To: René Koch <[email protected]> > Cc: [email protected] > Subject: Re: [Users] Vlan interface on top of bonding > > Hi René, > > Tanks for your help. I've tried in the direction you pointed and I was > able to share the bond among other tagged networks. One of the problems > would be how to edit ovirtmgmt network now that it's created, I just > can't find in the way to do it by the web. I've tried starting a hole > new datacenter, but it creates the network and disables all changes. > Thus, I can't mark the ovirtmgmt network as tagged and add other tagged > networks to the bond. > I can't tag the management network neither not use it, so I'm kind of > stuck again. > Regards, > > > On 08/05/13 11:51, René Koch (ovido) wrote: > > Hi, > > > > first of all welcome to the oVirt project. > > > > Did you configure vlan tagging for your ovirtmgmt network? > > If you're using vlan tagging on (bonded) interfaces in oVirt you have to > > add a vlan tag to all logical networks - can't mix tagged and untagged > > logical networks. > > > > e.g (same for bonds as well): > > Name - VLAN - Network Name > > eth0 - eth0.10 - ovirtmgmt > > eth0.11 - lan1 > > eth0.12 - lan2 > > > > Hope this helps. > > > > > > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
