On Wed, May 8, 2013 at 10:15 PM, René Koch wrote: > Hi, > > vlan tagging for ovirtmgmt interface is a bit tricky. > > Here's how I do it: > - configure vlan tag on host(s) and switch - imho not necessary to have a > ovirtmgmt bridge available but vlan tagging configured for your ovirtmgmt > network on your ethx or bondx interface > - create a new datacenter (without hosts in it!) > - edit ovirtmgmt logical network (if it's not possible: delete it and create > new interface ovirtmgmt with vlan tag) > - put host(s) in new datacenter > - configure network from oVirt webadmin gui (maybe you have to uncheck > "verify connectivity between engine and hosts") > > I can't say for sure if the steps above will work - maybe you have to do more > directly on the host. > Did a few setups with tagged ovirtmgmt interfaces in oVirt and RHEV but newer > wrote down a definitive guide for it :( > > > Regards, > René
Perhaps some steps related to this same thing in this thread I began in January and where Rene' answered too.. (I didn't final feedback, I don't remember the final results): http://lists.ovirt.org/pipermail/users/2013-January/011334.html I think the workflow and the detailed points could apply to your configuration Gianluca _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
