Dne 23.5.2013 20:03, Sven Knohsalla napsal(a):
Hi Jabuk,
we had the same issue with our windows server VMs under oVirt3.0, by switching
bonding mode of the HVs from trunk to LACP we did get this solved.
Root cause unknown.We have 0.1-52 driver installed on w2k8/12.
Not sure if you are running in the same issue here?!
Otherwise you should take a look at the hypervisor network bridge which has
been assigned to this VM, and check if the tagging is correct and network
traffic is going through.
Cheers,
Sven.
Sven Knohsalla | System Administration | Netbiscuits
Office +49 631 68036 433 | Fax +49 631 68036 111 |E-Mail
[email protected] | Skype: netbiscuits.admin
Netbiscuits GmbH | Europaallee 10 | 67657 | GERMANY
-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von
Jakub Bittner
Gesendet: Donnerstag, 23. Mai 2013 19:30
An: [email protected]
Betreff: [Users] Windows 7 networking problem
Hi,
Ive installed Windows 7 guest and when I connect Virtio NIC it only gets IP
address from DHCP, but I can not communicate, even not ping to network. I used
red-hat packaged virtio driver in version 1.6.3 and than
0.1-52 from linux-kvm.com, but the result is the same. (I restarted Windows
several times). My Ubuntu guest works great.
What do I wrong?
Thank you ;-)
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
I changed mode to mode1 Active-backup and it works. I will try 802.3ad
later.. Thank you
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
