On 1/22/2014 2:44 PM, Joop wrote:
Ted Miller wrote:
I am having trouble getting fencing to work on my HP DL180 g6 servers.
They have ilo100 controllers. The documentation mentions ipmi compliance,
but there are problems.
The ipmilan driver gets a response, but it is the wrong response. A
status request results in the NMI line being asserted, which (in standard
PC architecture) is the same as pressing the reset button (which these
servers don't have).
Thats weird. I have 2 ML110 G6 desktop servers, as storage servers, and
those have ilo100 controllers too and I just checked and they are setup as
ipmilan in engine.
I have used the Test button more than once and never had problems. My
Summary page says:
*IPMI Version:* 2.0
*Firmware Version:* 4.23
*Hardware Version:* 1.0
*Description:* ProLiant ML110 G6
*System GUID:* 33221100-5544-7766-8899-AABBCCDDEEFF
Mayb that helps you to track down the problem. If you have got question,
please ask.
Joop
Joop, thanks for the info. That tells me I was not totally off track when I
was trying the ipmilan driver.
I have firmware 4.21 in my controllers. I'll have to see about updating that.
One thing I have figured out, this problem would not have been so noticeable,
except that something is causing host s1 to go "non responsive" every few
hours. That provokes a Restart -> Stop -> Status -> Start sequence from the
fencing system.
I will have to deal with what is causing the "non responsive" condition, but
first I want to work through the fencing problem.
I tried the ilo2 driver, but the test of that produced even more convulsive
messages from the computer.
Ted Miller
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
