Hi, ----- Original Message -----
> From: "Ted Miller" <[email protected]> > To: [email protected] > Sent: Wednesday, January 22, 2014 10:35:51 PM > Subject: Re: [Users] fencing: HP ilo100 status does NMI, reboots computer > On 1/22/2014 2:44 PM, Joop wrote: > > Ted Miller wrote: > > > > I am having trouble getting fencing to work on my HP DL180 g6 servers. > > > They > > > have ilo100 controllers. The documentation mentions ipmi compliance, but > > > there are problems. > > > > > > The ipmilan driver gets a response, but it is the wrong response. A > > > status > > > request results in the NMI line being asserted, which (in standard PC > > > architecture) is the same as pressing the reset button (which these > > > servers > > > don't have). > > > > > Thats weird. I have 2 ML110 G6 desktop servers, as storage servers, and > > those > > have ilo100 controllers too and I just checked and they are setup as > > ipmilan > > in engine. > > > I have used the Test button more than once and never had problems. My > > Summary > > page says: > > > IPMI Version: 2.0 > > > Firmware Version: 4.23 > > > Hardware Version: 1.0 > > > Description: ProLiant ML110 G6 > > > System GUID: 33221100-5544-7766-8899-AABBCCDDEEFF > > > Mayb that helps you to track down the problem. If you have got question, > > please ask. > > > Joop > > Joop, thanks for the info. That tells me I was not totally off track when I > was trying the ipmilan driver. > I have firmware 4.21 in my controllers. I'll have to see about updating that. > One thing I have figured out, this problem would not have been so noticeable, > except that something is causing host s1 to go "non responsive" every few > hours. That provokes a Restart -> Stop -> Status -> Start sequence from the > fencing system. > I will have to deal with what is causing the "non responsive" condition, but > first I want to work through the fencing problem. > I tried the ilo2 driver, but the test of that produced even more convulsive > messages from the computer. Note that lo100 - afaik there no such a thing as ilo100 - is unrelated to iLo (whatever version). These are two completely different products - lo100 is on the board of some of the lower-end DL1xx series (and iirc also available as an add-on card) and iLo is on the board of DL3xx series servers. -- Didi
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
