----- Original Message ----- > From: "Ricardo Esteves" <[email protected]> > To: "Federico Simoncelli" <[email protected]> > Cc: [email protected] > Sent: Wednesday, May 14, 2014 1:45:53 AM > Subject: RE: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) > > In attachment follows the defaults and the modified versions of the nodes > files.
If selecting the relevant host in "Hosts" you see the bnx2i interface in the "Network Interfaces" subtab, then you can try to: 1. create a new network in the "Network" tab, "VM network" checkbox should be disabled 2. select the relevant host in "Hosts" and use "Setup Host Networks" in the "Network Interfaces" subtab 3. configure the bnx2i interface and assign it to the new network you just created 4. in "iSCSI Multipathing" subtab of tab "Data Center" add a new entry where you bind the iscsi connection to the new network you created Ping me on IRC if you need more help. My nick is fsimonce on #ovirt -- Federico > -----Original Message----- > From: Federico Simoncelli [mailto:[email protected]] > Sent: terça-feira, 13 de Maio de 2014 08:58 > To: Ricardo Esteves > Cc: [email protected] > Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) > > ----- Original Message ----- > > From: "Ricardo Esteves" <[email protected]> > > To: [email protected] > > Sent: Friday, April 11, 2014 1:07:31 AM > > Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) > > > > Hi, > > > > I've put my host on maintenance, then i configured iscsi offload for > > my broadcom cards changing target's file's (192.168.12.2,3260 and > > 192.168.12.4,3260) in my node > > iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface > > bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations > > are back to default. > > Can you share the changes you made? Thanks. _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
