----- Original Message ----- > From: "Federico Simoncelli" <[email protected]> > To: "Ricardo Esteves" <[email protected]> > Cc: [email protected] > Sent: Wednesday, May 14, 2014 3:47:58 PM > Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) > > ----- Original Message ----- > > From: "Ricardo Esteves" <[email protected]> > > To: "Federico Simoncelli" <[email protected]> > > Cc: [email protected] > > Sent: Wednesday, May 14, 2014 1:45:53 AM > > Subject: RE: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) > > > > In attachment follows the defaults and the modified versions of the nodes > > files. > > If selecting the relevant host in "Hosts" you see the bnx2i interface in the > "Network Interfaces" subtab, then you can try to:
Sorry I just noticed that you mentioned in the subject that you're using oVirt 3.2. What I suggested is available only since oVirt 3.4. -- Federico > 1. create a new network in the "Network" tab, "VM network" checkbox should > be disabled > 2. select the relevant host in "Hosts" and use "Setup Host Networks" in the > "Network Interfaces" subtab > 3. configure the bnx2i interface and assign it to the new network you just > created > 4. in "iSCSI Multipathing" subtab of tab "Data Center" add a new entry where > you bind the iscsi connection to the new network you created > > Ping me on IRC if you need more help. My nick is fsimonce on #ovirt > > -- > Federico _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
