|
Hi Federico, I've upgrade to 3.4 and bindded the network to the iscsi connection on "iSCSI Multipathing" tab, but for what i see it added two new connections to my targets 192.168.12.1 and 192.168.12.4 (the ones i choosed) but they are still using tcp (sofware iscsi ) instead of bnx2i iscsiadm -m session tcp: [1] 192.168.11.1:3260,1 iqn.1986-03.com.hp:storage.msa2324i.1226151a60 tcp: [2] 192.168.12.2:3260,3 iqn.1986-03.com.hp:storage.msa2324i.1226151a60 tcp: [3] 192.168.12.4:3260,4 iqn.1986-03.com.hp:storage.msa2324i.1226151a60 tcp: [4] 192.168.11.3:3260,2 iqn.1986-03.com.hp:storage.msa2324i.1226151a60 tcp: [5] 192.168.12.2:3260,3 iqn.1986-03.com.hp:storage.msa2324i.1226151a60 tcp: [6] 192.168.12.4:3260,4 iqn.1986-03.com.hp:storage.msa2324i.1226151a60 I see that when i bindded the network in iscsi multipathing it creates my interface eth3 in /var/lib/iscsi/ifaces but with transport_name=tcp : cat /var/lib/iscsi/ifaces/eth3 # BEGIN RECORD 6.2.0-873.10.el6 iface.iscsi_ifacename = eth3 iface.transport_name = tcp iface.vlan_id = 0 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Is there anyway to tell ovirt to use bnx2i instead of tcp? Best regards, Ricardo Esteves. On 14-05-2014 23:48, Federico
Simoncelli wrote:
----- Original Message -----From: "Federico Simoncelli" <fsimo...@redhat.com> To: "Ricardo Esteves" <ricardo.m.este...@gmail.com> Cc: users@ovirt.org Sent: Wednesday, May 14, 2014 3:47:58 PM Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)----- Original Message -----From: "Ricardo Esteves" <ricardo.m.este...@gmail.com> To: "Federico Simoncelli" <fsimo...@redhat.com> Cc: users@ovirt.org Sent: Wednesday, May 14, 2014 1:45:53 AM Subject: RE: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) In attachment follows the defaults and the modified versions of the nodes files.If selecting the relevant host in "Hosts" you see the bnx2i interface in the "Network Interfaces" subtab, then you can try to:Sorry I just noticed that you mentioned in the subject that you're using oVirt 3.2. What I suggested is available only since oVirt 3.4. |
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
