----- Original Message -----
> From: "Raul Laansoo" <[email protected]>
> To: "Maor Lipchuk" <[email protected]>
> Cc: "users" <[email protected]>
> Sent: Monday, October 27, 2014 8:43:31 AM
> Subject: Re: [ovirt-users] Import FC Storage as iSCSI
>
> Hi.
>
> Thank you for looking into this. Does this only affect the import or
> influences also the process of attaching storage domain to Data Center (you
> can't attach iSCSI Storage Domain to FC DC and vice versa?)
Hi Raul,
for now, the fix should include the ability to "switch" storage types only
through the import process,and not through the attach process.
I think that the import process might be enough because you can always remove
the Storage Domain and re-import it to the setup as another storage type.
> If I understand
> correctly, the Data Center's storage type is set at the initialization time,
> when the first storage domain is attached and you can't change it
> afterwards. In previous versions you could clearly see the DC storage type,
> now it's not visible.
You are right, mixed type data center is a feature introduced in version 3.4
(see http://www.ovirt.org/Features/Mixed_Types_Data_Center),
There should be only two type of Data Center local and shared.
The import Storage Domain feature is supported only from version 3.5 so it can
only be supported in mixed type Data Centers.
>
> Regards.
> Raul
>
> ----- Original Message -----
> > From: "Maor Lipchuk" <[email protected]>
> > To: "Itamar Heim" <[email protected]>
> > Cc: "raul laansoo" <[email protected]>, "Vered Volansky"
> > <[email protected]>, "users" <[email protected]>
> > Sent: Monday, 27 October, 2014 2:16:14 AM
> > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> >
> >
> >
> >
> >
> > ----- Original Message -----
> > > From: "Itamar Heim" <[email protected]>
> > > To: "Maor Lipchuk" <[email protected]>, "raul laansoo"
> > > <[email protected]>
> > > Cc: "Vered Volansky" <[email protected]>, "users" <[email protected]>
> > > Sent: Sunday, October 26, 2014 9:34:14 PM
> > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > >
> > > On 10/26/2014 03:58 PM, Maor Lipchuk wrote:
> > > > Hi Raul,
> > > >
> > > > The storage domain type is determined from the Storage Domain meta
> > > > data.
> > > > If your storage domain was previously an FC Storage Domain, the import
> > > > process will read this from the meta data and import it as an FC
> > > > Storage
> > > > Domain.
> > > >
> > > > This behavior should be changed so the storage type will be determined
> > > > by
> > > > the user instead from the meta data,
> > > > I've opened a bug on this issue for 3.5,
> > > > https://bugzilla.redhat.com/1157240.
> > >
> > > so i guess for now the metadata can be changed as a workaround?
> >
> > I believe so,
> > I've tried now to import an existing iSCSI Storage Domain after changing
> > its
> > meta data from ISCSI to FCP and it seems to work well, the Storage was
> > imported as Fibre Channel.
> >
> > >
> > > >
> > > > Regards,
> > > > Maor
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Allon Mureinik" <[email protected]>
> > > > To: "Maor Lipchuk" <[email protected]>
> > > > Cc: "Vered Volansky" <[email protected]>, "users" <[email protected]>,
> > > > "Raul
> > > > Laansoo" <[email protected]>
> > > > Sent: Sunday, October 26, 2014 10:42:53 AM
> > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > >
> > > > Maor, does this ring in bells wrt importing a storage domain?
> > > >
> > > > ----- Original Message -----
> > > >> From: "Raul Laansoo" <[email protected]>
> > > >> To: "Vered Volansky" <[email protected]>
> > > >> Cc: "users" <[email protected]>
> > > >> Sent: Thursday, October 23, 2014 4:51:34 PM
> > > >> Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > >>
> > > >> Hi.
> > > >>
> > > >> I have done this because this is the only way to access iSCSI target.
> > > >> But
> > > >> after import it shows up as FC (the original storage domain type).
> > > >> Where
> > > >> does this information come from? I have DataCenter setup from about
> > > >> version
> > > >> ovirt-engine-3.3.2.
> > > >>
> > > >> Thank you.
> > > >>
> > > >> ----- Original Message -----
> > > >>> From: "Vered Volansky" <[email protected]>
> > > >>> To: "Raul Laansoo" <[email protected]>
> > > >>> Cc: "users" <[email protected]>
> > > >>> Sent: Thursday, 23 October, 2014 4:24:12 PM
> > > >>> Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > >>>
> > > >>>
> > > >>>
> > > >>> ----- Original Message -----
> > > >>>> From: "Raul Laansoo" <[email protected]>
> > > >>>> To: "users" <[email protected]>
> > > >>>> Sent: Thursday, October 23, 2014 10:59:30 AM
> > > >>>> Subject: [ovirt-users] Import FC Storage as iSCSI
> > > >>>>
> > > >>>> Hello.
> > > >>>>
> > > >>>> I have created an FC Storage Domain and made snapshots of all LUNs
> > > >>>> on
> > > >>>> the
> > > >>>> SAN. Now I want to use those snapshots on another Data Center over
> > > >>>> iSCSI
> > > >>>> connection to test recovery. I can import the domain, but the
> > > >>>> domains
> > > >>>> Storage Type is FC and I can't attach it to host. Is it possible to
> > > >>>> change
> > > >>>> domain type to iSCSI or some other way to import storage domain.
> > > >>>
> > > >>> Just select iSCSI as thetype when you import it. This is the type of
> > > >>> the
> > > >>> new
> > > >>> domain.
> > > >>>
> > > >>> Vered
> > > >>>
> > > >>>>
> > > >>>> Thank you.
> > > >>>>
> > > >>>> Raul
> > > >>>> _______________________________________________
> > > >>>> Users mailing list
> > > >>>> [email protected]
> > > >>>> http://lists.ovirt.org/mailman/listinfo/users
> > > >>>>
> > > >>>
> > > >> _______________________________________________
> > > >> Users mailing list
> > > >> [email protected]
> > > >> http://lists.ovirt.org/mailman/listinfo/users
> > > >>
> > > > _______________________________________________
> > > > Users mailing list
> > > > [email protected]
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > >
> > >
> >
>
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
