Hi Alan,
basically, it could be that your ACL in your iSCSI server might be configured
without the Initiator IQN of your Host.
do you have any access to your iSCSI server?
also, can u try to connect to the iSCSI server directly from your Host and see
if it works:
1) First discover the targets:
iscsiadm -m discovery -t st -p {scsi_server_ip},{port}
2) Try to log out from the target you were trying to login before:
Example:
iscsiadm -m node -u -T {iqn.2015-07.com.target_name.redhat}:{port} -p
{scsi_server_ip},{port} -u
3) list your files at /sys/block
4) logging in to the target:
iscsiadm -m node -T {iqn.2015-07.com.target_name.redhat}:{port} -p
{scsi_server_ip},{port} -l
5) list again all your files at /sys/block, and check if there were new added
block devices.
Regards,
Maor
----- Original Message -----
> From: "Alan Murrell" <[email protected]>
> To: "users" <[email protected]>
> Sent: Tuesday, August 11, 2015 8:41:24 AM
> Subject: Re: [ovirt-users] iSCSI question... LUNS->Targets balnk
>
> I think it is something with oVirt. I installed a VM with FreeNAS and
> configured it tot he setup guide for iSCSI. Once again, I can connect
> my Windows 7 PC to the iSCSI target and LUN no problem, but when I try
> to add iSCSI storage in oVirt, it sees the target, can log in to the
> target but does not see any LUNs.
>
> iSCSI is not a huge deal; I guess I will just stick with NFS and
> consider iSCSI in oVirt not ready.
>
> Regards,
>
> Alan
>
> _______________________________________________
> Users mailing list
> [email protected]
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
