On Mon, Dec 7, 2015 at 11:34 AM, Taste-Of-IT <kont...@taste-of-it.de> wrote:
> Am 2015-12-07 10:21, schrieb Yedidyah Bar David:
>> On Mon, Dec 7, 2015 at 11:05 AM, Taste-Of-IT <kont...@taste-of-it.de>
>> wrote:
>>> Am 2015-12-07 08:06, schrieb Yedidyah Bar David:
>>>> On Mon, Dec 7, 2015 at 12:38 AM, Taste-Of-IT <kont...@taste-of-it.de>
>>>> wrote:
>>>>> Hello,
>>>>> i am new with ovirt and i installed ovirt engine 3.6 on centos 7. After
>>>>> first login i create the host with fqdn of ovirt server but without
>>>>> powersavesettings. Firt i saw installing as status for host, but after
>>>>> a
>>>>> while nothing happend, I reboot the server. In engine.log i see "VMs
>>>>> initialization finished for Host", but i cant open the webgui. What can
>>>>> i
>>>>> do? Where can i look to find the error and what have i done wrong?
>>>> If host-deploy managed to finish, you can see its log in [1]. Otherwise
>>>> please try to (re)install the host.
>>>> [1] /var/log/ovirt-engine/host-deploy/
>>>> Best,
>>> Hi Didi,
>>> ok i will have a closer look into the log. Actuall the WebGUI doesnt
>>> load,
>>> services are up and running. How can i reinstall the host? Via cli? Or do
>>> you mean the hostsystem with installed ovirt engine? thx
>> Not sure I follow.
>> The engine runs on some machine, let's call it "the engine machine".
>> If it's a self-hosted-engine, it's running inside a VM managed by itself.
>> Otherwise it's running elsewhere (on some physical machine, or some other
>> VM).
>> A "Host", in ovirt terminology, is where VMs run.
>> Now please describe what you did, what you now try to do that doesn't
>> work, and what you can find in logs that might be related.
>> If you can't access the web admin ui, that's a completely different
>> problem than if you can't add a host to the engine.
>> Best,
> Hi Didi,
> as far i understand there are to ways to setup ovirt. One as self-hosted
> enginge for ha and with ovirt host in vm on storage

That's called "self-hosted-engine"

> and hosted engine where
> all runs on the same host.

This is called all-in-one [1].

[1] http://www.ovirt.org/Feature/AllInOne

> So i setup hosted engine on same machine and in
> installation process i setup iso_domain via nfs too. i have done nothing
> more yet. so as i can see and read from the manual i now have to setup the
> host,

No. You are not supposed to setup the host from the web interface.
I didn't try that recently, but in the past there were issues similar
to what you wrote below. Please follow the instructions in that page.
Also please note that in 4.0, allinone will be dropped. Systems that
wish to have everything on a single host will need to use hosted-engine.
Also note that people reported locking issues with local nfs mounts, so
it seems like the safest bet for now is to use nested kvm - run a VM to
play the "Host" role, and another VM as an nfs server (or iscsi), and
then either a third VM for the engine, or hosted-engine (meaning, engine
runs inside a VM running inside the first VM).

> than network and than data domain and so on. now i setup the host and
> say new, put a name inside and the fqdn of the initial host of host engine
> like myserver.com. after that i saw the progress which says "installing.." i
> wait several minutes and after that i got network time out and cant enter
> the webgui. hope that helps

Good luck,
Users mailing list

Reply via email to